Gamma Value for Color Send Jobs

You can set the Gamma value for color scanned data. If the set value corresponds to the Gamma value at the receiving end, the scanning exposure of the output data at the receiving end is automatically adjusted to the level best suited to the quality of the original. Gamma values are expressed as input-output characteristics.

Output is darkened as the gamma value is increased, and is lightened as the gamma value is decreased. If the density of images received at the destination is excessively light or dark, the gamma value can be changed before resending the images.

NOTE

If the optional Super G3 FAX Board is installed, and you are sending documents by fax, this setting is disabled.

The default setting is 'Gamma 1.8'.

1Press (Additional Functions) [Communications Settings] [TX Settings] under <Common Settings>.

If necessary, see the screen shots in steps 1 and 2 of "Automatic Document Deletion," on p. 8-4.

2 Press [] or [] until [Gamma Value for Color Send Jobs] appears press [Gamma Value for Color Send Jobs].

Customizing Communications Settings

8

Gamma Value for Color Send Jobs

8-33

Page 312
Image 312
Canon C3200 manual Gamma Value for Color Send Jobs