Canon C3200 manual 4Checking/Changing the Status of Send Jobs

7

Checking/Changing the Send/Receive Status

4 Select a job whose detailed information you want to check ➞ press [Details].

If the job that you want to select is not displayed, press [▼] or [▲]to scroll to the job.

NOTE

•If Erase Failed TX in TX Settings under <Common Settings> in Communications Settings (from the Additional Functions screen) is set to 'Off' when multiple destinations are selected for a send job, <Finished.> is displayed for those destinations to which the job was sent successfully, and <Error> is displayed for those destinations that had transmission errors. When multiple destinations are simultaneously specified for a send job, and you select and cancel the transmission to any one of those destinations, or the retransmission of an error job or an interrupted job is completed successfully, information on all of those simultaneously specified destinations is displayed in the log.

•To access the Erase Failed TX setting, press (Additional Functions) ➞ [Communications Settings] ➞ [TX Settings] under <Common Settings> ➞ [Erase Failed TX].

•If you send documents using the Full mode to a machine that does not support the Full mode, delivery confirmation cannot be carried out. When this happens, the job concerned is not considered as complete even though the actual sending of the document is successful. Such jobs are displayed as <Waiting for result...> on the Status screen until the time set for Full Mode TX Timeout in E-mail/I-Fax Settings in Communications Settings in System Settings (from the Additional Functions screen) has lapsed. After the timeout, the job is moved to the log, and the result is shown as <->.

7-4Checking/Changing the Status of Send Jobs