Frame Erase 4-7
Special Scanning Features
4
4

Press [Original Frame Erase].

5

Press [-] or [+] to set the frame erase width.

NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
-
(numeric keys), and
(Clear) to clear your entries.
•
You can change the values by pressing [-] or [+], even if you have entered the
values using
-
(numeric keys).
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '1/8" (4 mm)'. The maximum width that you can set for the
Original Frame Erase mode is '1 15/16" (50 mm)'.

●If you want to set the same width for all four borders:

❑Press [-] or [+] to set the frame erase width ➞ press [Next].