Canon C3200 manual Press Erase Failed TX, Select On or Off press OK

3 Press [Erase Failed TX].

NOTE

If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired setting.

4 Select [On] or [Off] ➞ press [OK].

Customizing Communications Settings

8

[On]: Erases jobs after sending, whether the transmission ends successfully or with an error.

[Off]: Stores a job in memory if the transmission ends in an error.

On the System Monitor screen, you can resend jobs whose transmissions have failed or change the destinations and resend the jobs. (See "Changing the Destination," on p. 7-7 or "Resending a Job," on p. 7-11.)

The selected mode is set.

5 Press [Done] repeatedly until the Send Basic Features screen appears.

Automatic Document Deletion 8-5