Canon C3200 manual Changing the Destination, Press System Monitor Send

Changing the Destination

You can change the destination of a send job from the System Monitor screen.

IMPORTANT

•You can only change the destination for send jobs that have been canceled due to a transmission error or jobs that have been set with the Delayed Send mode and are still waiting in the send queue.

•To be able to change the destination for send jobs that have been canceled due to a transmission error, you must first set Erase Failed TX in TX Settings under <Common Settings> in Communications Settings (from the Additional Functions screen) to 'Off'. (See "Automatic Document Deletion," on p. 8-4.)

•You cannot change more than one destination at the same time. You also cannot change the destination of a whole group at once.

•You cannot change the destination of a send job if another job with the same job number is being sent or is waiting in the send queue. This restriction does not apply to Delayed Send jobs.

•If the total number of destinations, including the destinations specified by the Address Book and one-touch buttons that have been changed, and new destinations or destinations specified by a server, has reached 64, you can no longer change the destinations that have been specified by the Address Book or one-touch buttons.

NOTE

• You cannot change the destination type. For example, you cannot change the destination of a job from an e-mail address to an I-Fax address.

• If a job is specified to be stored in a User Inbox, you cannot change the inbox in which to store the job.

1 Press [System Monitor] ➞ [Send].

If necessary, see the screen shots in steps 1 and 2 of "Checking Send Job Details," on p. 7-2.

7

Checking/Changing the Send/Receive Status

Checking/Changing the Status of Send Jobs 7-7