System Manager Settings

10

Communications Settings

This section describes the e-mail, I-fax, and Memory RX Inbox settings.

E-Mail/I-Fax Settings

You can change the e-mail and I-fax transmission settings. The available settings are:

Maximum Data Size For Sending

Sets the maximum data size for outgoing e-mail messages and I-fax documents. If the e-mail message send job exceeds this data size limit, it is split up into several e-mail messages before being sent. However, I-fax transmissions that exceed the data size limit are handled as errors, and are not sent.

Default Subject

The subject that you enter here is used as the default subject whenever you do not enter a subject when sending a job.

Full Mode TX Timeout

Sets the time that elapses before sending operations terminate (automatically) if you do not receive a notification e-mail (MDN) from the recipient when you send an I-fax in the Full Mode.

Print MDN/DSN on Receipt

Sets whether to print notification e-mail messages that inform you of the successful delivery of I-fax jobs sent using the Full Mode.

Always Send Notice for RX Errors

Sets whether to inform the sender that the e-mail message or I-fax was not received successfully.

Use Send Via Server

Determines whether you can select to send jobs via the server on the screens specified or on screen where you can store I-fax destinations.

10-4Communications Settings

Page 423
Image 423
Canon C3200 manual Communications Settings, Mail/I-Fax Settings