Canon C3200 manual Resolution, You can specify the resolution before scanning the original

NOTE

Pressing [Cancel] ➞ [Done] ➞ [Cancel] only stores the new document sizes in the selected key ([Registered Size 1] or [Registered Size 2]), but does not activate them. If you press [OK] ➞ [Done] ➞ [OK], the new document sizes are stored in the selected key ([Registered Size 1] or [Registered Size 2]), and activated at the same time.

Resolution

You can specify the resolution before scanning the original.

IMPORTANT

•The maximum size of an image that you can send at 600 x 600 dpi resolution is 11" x 17". If the image exceeds this number of pixels in either the horizontal or vertical direction, it may be cropped.

•If the optional Super G3 FAX Board is installed, and you are sending documents by fax, the maximum size of an image that you can send at 400 x 400 dpi resolution is 11" x 17". If the image exceeds this number of pixels in either the horizontal or vertical direction, it may be cropped.

NOTE

The default setting is '200 x 200' dpi.

1 Place your originals ➞ specify the destination.

For more information on specifying the destination, see Chapter 2, "Basic

Sending Methods."

2 Press the Scan Settings drop-down list ➞ press [Option].

3

Basic Scanning Features

Scan Settings 3-15