Canon C3200 manual Press or + to set the frame erase width press OK

5 Press [-] or [+] to set the frame erase width ➞ press [OK].

The selected mode is set, and the display returns to the Special Features screen.

NOTE

•To enter values in millimeters, press [mm].

•When entering values in millimeters, you can also use - (numeric keys), and

(Clear) to clear your entries.

•You can change the values by pressing [-] or [+], even if you have entered the values using - (numeric keys).

•If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen.

•The default setting is '3/4" (18 mm)'. The maximum width that you can set for the Binding Erase mode is '13/16" (20 mm)'.

6 Press [Done] ➞ [OK].

The display returns to the Send Basic Features screen.

7 Press (Start).

Follow the instructions that appear on the touch panel display ➞ press (Start) once for each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning is complete.

4

Special Scanning Features

Frame Erase 4-15