OPERATION (continued)
6.After selecting a channel, use the fine tuning control, located on right earphone to adjust the reception. The PLL function automatically locks the three channels, providing you with
7.Adjust the volume using the volume control, also located on the right earphone.
8.When you are through using the headphones, switch them off using the POWER ON/OFF button, and place the audio source on standby.
Note: To ensure that your headphones are charged and ready for
use at all times, place them in the recharging cradle/transmitter when not in use.
Alternate Installation Configuration
The accessories included with your headphone system include a jack adapter for connecting the unit to a 6.35 mm headphone socket and a Y cable. Normally, when a device is plugged into a headphone jack, it automatically shuts off the speakers. If you want the speakers to continue playing while you are using the headphone set, you can use the Y adapter instead of the headphone jack. Use the supplied Y cable to connect your headphones to the two (red and white) RCA jacks. Connect the other end of the stereo audio cable to the AUDIO IN input jack at the back of the recharging cradle/transmitter. This is especially useful if, for example, your family is listening to music in one room of your home and you want to listen to the same music in another room. It is also beneficial in families where one person has a hearing impairment. That person can use the headphones to listen to the audio source, adjusting the volume as needed. This type of connection also enables you to use your headphones more simply as you will only need to switch on the audio source and switch on your headphones to activate.
10
