CONNECTING THE RECHARGING CRADLE/ TRANSMITTER
Follow this quick setup guide to ensure
1.Plug the stereo audio cable into the headphone jack of your audio source (e.g., stereo, TV, CD player, DVD, etc.). If your audio source has two RCA output jacks in place of a headphone jack, use the supplied Y cable to connect your headphones to the two (red and white) RCA jacks.
2.Connect the other end of the stereo audio cable to the AUDIO IN socket at the back of the recharging cradle/transmitter.
3.Connect the AC/DC main power adapter to the DC IN power supply socket at the back of the recharging cradle/transmitter. Then, connect the adapter to an electrical outlet.
Important: This power unit is intended to be correctly oriented in a vertical or floor mount position.
OPERATION
Standard usage
1.Switch on the audio source (TV, DVD, CD player, etc.) to which the recharging cradle/transmitter is connected. If your audio source is a DVD or CD player, start a disc.
Warning: The recharging cradle/transmitter has an automatic function that switches it off if the audio input jack does not receive an audio signal for approximately two minutes. If the volume on the audio source is too low, the recharging cradle/transmitter also switches off after two minutes. This feature was installed to comply with current legislation that reduces the amount of radio emissions in the environment. To ensure that this function is not accidentally triggered, set the audio source volume at approximately 50 percent capacity. Consult your component user’s manual for details on how to set the volume for headphones/earphones.
2.The recharging cradle/transmitter is now ready to receive an audio signal. The recharging cradle/transmitter is activated automatically when receiving an audio signal from the audio source.
3.Check to make sure the power on indicator light on the front of the recharging cradle/transmitter is lit, indicating that the unit is ready.
4.Push the POWER ON/OFF button, located on the right earphone. The LED light turns on to indicate activation.
5.The recharging cradle/transmitter features three phase lock loops (PLL) for radio frequency transmissions. Select one of these channels, using the switch on the back of the recharging cradle/transmitter.
