The selected destination appears on the Send Basic Features screen.

NOTE

To display [Access Number], set Access Number Management to 'On'. To access the Access Number Management setting, press (Additional Functions) [System Settings] [Manage/Access to Address Book] [Access Number Management]. (See "Manage/Access to Address Book," on p. 10-22.)

To cancel a selected destination, select the destination again to clear the check mark.

To view the detailed information of a selected destination, select the destination press [Details].

If you select only one destination, press (Start) to send from the Search Address Book/Server screen.

You can erase the destinations selected from the Address Book before you scan the document. (See "Erasing a Destination," on p. 2-52.)

Using the New Address Tab

You must specify the destination (such as an e-mail address, I-fax address, or file server address) in order to send documents. This section describes the procedure for specifying a new destination that has not been stored in the Address Book.

NOTE

If you frequently send documents to the same destinations, store these destinations in the Address Book beforehand. (See "Storing New Addresses," on p. 9-5.)

A maximum of 64 new addresses and addresses obtained through a server (User Inboxes are not included in this count) can be specified at the same time.

If the optional Super G3 FAX Board is installed, you can also specify fax numbers.

2

Basic Sending Methods

Specifying Destinations

2-5

Page 68
Image 68
Canon C3200 manual Using the New Address Tab