5

Sending Documents

NOTE

To use this feature, you must store sender names beforehand. (See "Registering Sender Names," on p. 1-16.)

If you set the unit's name in TX Settings, the unit's name is automatically registered as <00>. To set the unit's name, press (Additional Functions) [Communications Settings] [TX Settings] under <Common Settings> press [Unit Name]. (See "Registering the Unit's Name," on p. 1-19.)

12 Press [Done].

The display returns to the Send Basic Features screen.

13 Press (Start).

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display press (Start) once for each original. When scanning is complete, press [Done].

Scanning starts.

The scanned data is sent to the specified destination when scanning is complete.

NOTE

If the Preview key is lit, the Preview display setting is turned on, and you can verify the images from the Preview screen before sending your document. (See "Previewing Originals," on p. 5-34.)

5-22Sending Methods

Page 211
Image 211
Canon C3200 manual 22Sending Methods