Canon C3200 manual Platen Glass, Lift the feeder/platen cover, Place your originals face down

Platen Glass

You should use the platen glass when scanning bound originals (such as books and magazines), originals on heavy or lightweight paper, and transparencies into memory. You should also place the original on the platen glass when you want to scan an 11" x 17" original with an image that extends all the way to the edges without the periphery of the original being cut off. (See "Document Size," on p. 3-7.)

NOTE

The machine automatically detects the size of the following originals: 11" x 17", LGL, LTR, and LTRR.

1 Lift the feeder/platen cover.

Sensor

IMPORTANT

This machine is equipped with an open/close sensor on the feeder/platen cover (see circled area in the above illustration). When placing originals on the platen glass, lift the feeder/platen cover about 11 7/8" (300 mm) so that the sensor detaches from the feeder/platen cover. If the sensor does not detach from the feeder/platen cover, the size of the originals may not be detected correctly.

2 Place your originals face down.

1

Introduction to Sending Functions

Placing Originals 1-37