1

Introduction to Sending Functions

Feeder (DADF-K1) (Optional)

You should use the feeder when you want to scan several originals at the same time. Place the originals in the feeder and press (Start). The machine automatically feeds the originals onto the platen glass and scans them into memory. Two-sided originals can also be automatically turned over and scanned as two-sided documents.

You can place the following originals in the feeder's original supply tray:

Weight: 14 to 28 lb bond (52 to 105 g/m2)

Size: 11" x 17", LGL, LTR, LTRR, or STMT

Tray Capacity:

-11" x 17", LGL: 15 sheets (20 lb bond (80 g/m2))

-LTR or STMT: 30 sheets (20 lb bond (80 g/m2))

IMPORTANT

Do not place the following types of originals in the feeder:

-Originals with tears or large binding holes

-Severely curled originals or originals with sharp folds

-Clipped or stapled originals

-Carbon backed paper or other originals which might not feed smoothly

-Transparencies and other highly transparent originals

If the same original is fed through the feeder repeatedly, the original may fold or become creased, and make feeding impossible. Limit repeated feeding to a maximum of 30 times. (This number varies, depending on the type and quality of the original.)

If the feeder rollers are dirty from scanning originals written in pencil, perform the feeder cleaning procedure. (See Chapter 7, "Routine Maintenance," in the Reference Guide.)

Always smooth out any folds in your originals before placing them in the feeder.

1 Adjust the slide guides to fit the size of your originals.

1-40Placing Originals

Page 57
Image 57
Canon C3200 manual Feeder DADF-K1 Optional, Adjust the slide guides to fit the size of your originals