Onkyo 29400095 Error Messages, Disconnect the speaker setup, Microphone, Speaker Detect Error

First Time Setup—Continued

10	Disconnect the speaker setup
	microphone.
	2EQ: Auto Setup
	Please unplug setup microphone.

Notes:

•When the room correction and speaker setup is complete, the “Equalizer Settings” (page 69) will be set to “Audyssey” and the “Dynamic EQ” (page 71) will be set to “On”.

•You can cancel the Room Correction and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone.

Error Messages

While the room correction and speaker setup is in progress, one of the following error messages may appear:

❏Ambient noise is too high.

2EQ: Auto Setup

Ambient noise is too high.

Retry

Cancel

This message appears if the background noise is too loud and the measurements cannot be performed properly.

Remove the source of the noise and try again.

Retry: Return to the measured point immediately before and start set up again.

Cancel: Cancel the room correction and speaker setup.

❏Speaker Detect Error

This message appears if a speaker is not detected. “Yes” means that a speaker was detected. “No” means that no speaker was detected.

		2EQ: Auto Setup
		Speaker Detect Error
FL	:	Yes	FR	:	No
SL	:	---	SR	:	---
FHL	:	---	FHR	:	---
SBL	:	---	SBR	:	---
C	:	Yes	SW	:	---

Retry

Cancel

One of the front speakers has not been detected.

		2EQ: Auto Setup
		Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	No
FHL	:	---	FHR	:	---
SBL	:	---	SBR	:	---
C	:	Yes	SW	:	---

Retry

Cancel

One of the surround speakers has not been detected.

		2EQ: Auto Setup
		Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	No
FHL	:	---	FHR	:	---
SBL	:	---	SBR	:	Yes
C	:	Yes	SW	:	---

Retry

Cancel

The surround back speakers have been detected but the surround speakers haven’t.

		2EQ: Auto Setup
		Speaker Detect Error
FL	:	Yes	FR	:	Yes
SL	:	---	SR	:	Yes
FHL	:	---	FHR	:	---
SBL	:	No	SBR :		Yes
C	:	Yes	SW	:	---

Retry

Cancel

The right surround back speaker has been detected but the left surround back speaker hasn’t.

		2EQ: Auto Setup
		Speaker Detect Error
FL	:	Error	FR	:	Yes
SL	:	Yes	SR	:	Yes
FHL	:	---	FHR	:	---
SBL	:	Yes	SBR :		Yes
C	:	Yes	SW	:	Yes

Retry

Cancel

The speaker type detected does not match what was expected. The speaker may be or incorrect type or broken. Please check that it is the correct speaker type, or that all drivers are working.

48