Onkyo 29400095 instruction manual Rear Panel

Front & Rear Panels—Continued

Rear Panel

a bc d e f gh i

jk l mn o p qr

aDIGITAL IN COAXIAL 1 and 2

These coaxial digital audio inputs are for connect- ing components with coaxial digital audio outputs, such as CD and DVD/BD players. They’re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 41.

bDIGITAL IN OPTICAL 1 and 2

These optical digital audio inputs are for connecting components with optical digital audio outputs, such as CD and DVD/BD players. They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup” on page 41.

cCOMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Setup” on page 40.

dCOMPONENT VIDEO OUT

This RCA component video output is for connect- ing a TV or projector with a component video input.

eHDMI IN 1–5 and OUT

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD/BD player, DVD/BD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “HDMI Input Setup” on page 39.

The HDMI output is for connecting a TV or projec- tor with an HDMI input.

s

fFM ANTENNA

This jack is for connecting an FM antenna.

AM ANTENNA

These push terminals are for connecting an AM antenna.

gMONITOR OUT V

The composite video jack should be connected to a video input on your TV or projector.

hUNIVERSAL PORT

This jack is for connecting the component with the Universal Port connector such as UP-A1 series Dock.

iFRONT L/R, CENTER, SURR L/R, and SURR BACK L/R speakers

These terminal posts are for connecting the front L/R, center, surround L/R, surround back L/R, and front high L/R speakers.

The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers respectively, or used to bi-amp the front speakers. See “Bi-amping the Front Speakers” on page 18”.

The SURR BACK L/R terminals can be used to connect the front high L/R speakers. See “Speaker Settings” on page 42.

ju REMOTE CONTROL

This u(Remote Interactive) jack can be con- nected to an ujack on another Onkyo AV compo- nent. The AV receiver’s remote controller can then be used to control that component. To use u, you must make an analog audio connection (RCA) between the AV receiver and the other AV compo- nent, even if they are connected digitally.

10