Onkyo 29400095 instruction manual Audio Connection Formats, Signal Selection Example

Connecting the AV Receiver—Continued

■Signal Selection

If signals are present at more than one input, the inputs will be selected automatically in the fol- lowing order of priority: HDMI, component video, composite video.

However, for component video only, regardless of whether a component video signal is actually present, if a component video input is assigned to the input selector, that component video input will be selected. And if no component video input is assigned to the input selector, this will be interpreted as no component video signal being present.

In the Signal Selection Example shown on the right, video signals are present at both the HDMI and composite video inputs, however, the HDMI signal is automatically selected as the source and video is output by the HDMI outputs.

A video signal from the Composite Video In jack is output from the Composite Video Out jack regardless of the output priority.

DVD/BD player, etc.		Signal Selection Example
	Composite		Component	HDMI

IN

AV receiver

MONITOR OUT

Composite Component HDMI

TV, projector, etc.

The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V, or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

Audio Connection Formats

Audio equipment can be connected to the AV receiver by using any of the following audio con- nection formats: analog, optical, coaxial, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for analog line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not output by the analog TV/TAPE OUT.

DVD/BD player, etc.

Audio Signal Flow Chart

	Analog	Optical	Coaxial	HDMI
			IN
AV receiver
			OUT
	Analog			HDMI

	*1	Depends on the “Audio TV Out” setting
TV, projector, etc.		(see page 78).

If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, digital, analog.

25