Magnavox H2160MW9 owner manual Disc Audio, Pcm, Audio Language Default Original DVD only

SETUPS

Playback (cont’d)

2 Disc Audio

Choose the appropriate audio setting for your external device.

It will only affect a disc playback.

Use [K / L] to select a desired item, then press [OK].

Disc Audio

A Dynamic Range Control

B PCM

C Dolby Digital

A Dynamic Range Control (Default : ON) (DVD only)

Set to “ON” to compress the range between soft and loud sounds.

Use [K / L] to select a setting, then press [OK].

Dynamic Range Control

ON

OFF

Your setting will be activated.

Note

•Dynamic range control function is available only with the titles which are recorded in the Dolby Digital format.

B PCM (Default : 48kHz)

Use [K / L] to select a setting, then press [OK].

PCM

48kHz

96kHz

Your setting will be activated.

48kHz	: If your amplifier/decoder is NOT compatible
	with 96kHz PCM, select “48kHz”. 96kHz sound
	will be output in 48kHz.
96kHz	: If your amplifier/decoder is compatible with
	96kHz PCM, select “96kHz”. 96kHz sound will
	be output.

Note

When playing back disc with copyright protection

•Even if you select “96kHz”, the sound will be down sampled at 48kHz.

C Dolby Digital (Default : Stream)

Use [K / L] to select a setting, then press [OK].

Dolby Digital

PCM

Stream

Your setting will be activated.

PCM	: Converts the Dolby Digital into PCM (2 channel).
	When your amplifier/decoder is NOT
	compatible with Dolby Digital, set to “PCM”.
Stream	: Outputs Dolby Digital signals
	When your amplifier/decoder is compatible
	with Dolby Digital, set to “Stream”.

•With regard to DVD playback, if the audio source is in Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main audio (L), sub audio (R), or a combination of both (L / R) using your amplifier / decoder.

3 Disc Menu Language (Default : English) (DVD only)

Set the language for disc menu.

Use [K / L] to select a setting, then press [OK].

Disc Menu Language

English

French

Spanish

Other

Your setting will be activated.

4 Audio Language (Default : Original) (DVD only)

Set the audio language.

Use [K / L] to select a setting, then press [OK].

Audio Language

Original

English

French

Spanish

Other

Your setting will be activated.

•When “Original” is selected, the audio language will be in the disc’s default language.

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

Español

EN 103