Magnavox H2160MW9 owner manual RF Modulator Connection

RF MODULATOR CONNECTION

If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below.

1)Disconnect the power cords of the devices from the AC outlet.

2)Make the connection as illustrated below.

3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator.

4)Plug in the power cords of the devices to the AC outlet.

5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator.

VHF / UHF antenna

rear of this unit

VIDEO VIDEO		Y
IN	OUT
IN

L

OUT

	R	IN	OUT	COAXIAL
ANTENNA	AUDIO IN	S-VIDEO AUDIO OUT	S-VIDEO
	(L1)

RF coaxial cable

or

cable TV company

IN

VIDEO

OUT

L

OUT

ANTENNA	R
	AUDIO OUT

RCA video cable

rear of your TV

RCA audio cable

ANT. IN

rear of your RF modulator

(not supplied)

RF coaxial cable

RF coaxial cable

3 4 R L

ANT. IN CHANNEL AUDIO IN VIDEO IN TO TV

Set channel 3 or 4

Supplied cables used in this connection are as follows:

•RF coaxial cable x 1

•RCA audio cable (L/R) x 1

•RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

Note

•RF modulator is not supplied with this unit. You need to purchase it at your local store.

•The quality of picture may become poor if this unit is connected to an RF modulator.

16 EN