Magnavox H2160MW9 owner manual Information on Dubbing, Guide to Dubbing Menu Display

DUBBING

Information on Dubbing

You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to page 41 to see the recording compatibility.

Introduction

Guide to Dubbing Menu Display

1	HDD	DVD
			3000 MB	3
			Dubbing List
2	Add
	Delete All			4
	Dubbing Start
			1/1	5

1Dubbing direction

2 Dubbing menu

3 Remaining recordable space

4 Dubbing list

5 Current page number / total number of pages

Recording Mode for Dubbing

“High”

This unit is compatible with the high speed dubbing from HDD to DVD.

If you dub a title recorded in SLP mode to DVD+R/-R, dubbing speed will be 24 times at the maximum. To perform the high speed dubbing, set the recording mode to “High”.

•Duration of high speed dubbing will vary depending on the recording mode or the title amount.

•High speed dubbing is not available when;

-recording mode is set to other than “High”.

-dubbing from a DVD to the HDD.

-there is not enough space in the HDD.

-duration of the title is more than 5 hours.

•During dubbing (except for high speed dubbing), you can use [STOP C] on the front panel or press [STOP C] for 2 seconds on the remote control, and any other buttons will be invalid.

“Auto”

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically.

•The recording may be cut short when the available recording space of the disc is too limited.

Note on dubbing

•During normal dubbing, you can watch the playback picture of the title being dubbed (the audio cannot be changed). During high speed dubbing, however, the playback picture will not appear.

•Dubbing of a “copy-once only” program is not possible with this unit.

•If you stop the dubbing halfway, the contents will be dubbed up to the point where you stop the dubbing (except for the high speed dubbing). With high speed dubbing, nothing will be dubbed if you stop it halfway.

•To stop the dubbing in progress, press [STOP C] on the front panel or press [STOP C] for 2 seconds on the remote control.

Other modes

Refer to page 40 for the information on other modes.

Connections Basic Setup Recording Playback Editing Function Setup Others

Español

EN 51