Magnavox H2160MW9 owner manual Hint, To stop the timer recording in progress, Recording Playback

	TIMER RECORDING
	How to select a channel number for the timer recording
Analog TV	For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
	the channel will be decided as soon as you enter the channel number.
Analog CATV	For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
	125), the channel will be decided as soon as you enter the channel number.
Digital TV	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.
Digital CATV	For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
	135), the channel will be decided as soon as you enter the channel number.
minor channels	For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
	the channel will be decided as soon as you enter the channel number.

<Hint>

•You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5]

•For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.

•For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed. [K / L] does not skip the non-existed minor channels.

Introduction Connections Basic Setup

To stop the timer recording in progress

Press [STOP C] on the front panel of the unit to stop the timer recording in progress or press and hold [STOP C] on the remote control for 2 seconds.

Checking, canceling, or correcting the timer programming information

1)Press [TIMER].

2)Check the information.

Timer Programming

FEB/20/08 10:30 AM 125.1 SP
SP (1:00)		TUE FEB/19 11:30AM
Date	Start	End	CH
FEB/20	10:30AM 11:30AM		DTV125. 1

If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.

Timer Programming

FEB/20/08 10:30 AM 125.1 SP
SP (1:00)			WED FEB/20 1:00PM
	Date	Start	End	CH
E41	FEB/20	10:30AM 11:30AM		DTV125. 1
		New Program
				1/1

Each error number means:

Recording Playback

New Program

1/1

3-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [OK].

2 Use [K / L] to select “Delete”, then press [OK].

Confirmation window will appear.

3 Use [K / L] to select “Yes”, then press [OK].

3-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [OK].

2 Use [K / L] to select “Program Change”, then press [OK].

3 Correct the timer program by using [K / L / { / B], then press [OK].

4) Press [TIMER] to exit.

Note

E1-22	Recording error other
E37-39	than below
E24	Unrecordable disc
E25-26	Copy prohibited
	program
E29	Disc protected
E30	Disc full
E35	PCA full *1
E36	Already finalized
	video format disc
E40	Some portion has
	not been recorded
	because of program
	overlapping.
	Recording did not
	start at the start time.
E41	Power failed
E42	No disc when
	recording
E43	Already 49 titles
	recorded

E44	Already 254 chapters
	recorded
E45	Copy prohibited
	program
E46	It is impossible to
	record additionally
	on a disc recorded
	by other units
	when setting “
	Make Recording
	Compatible” to “OFF”.
E47	Already 600 titles
	recorded on the HDD
E49	There was no disc
	space on the HDD
	at the starting time
	for the HDD timer
	recording.
E50	HDD recording is
	canceled due to the
	insufficiency of the
	disc space on the
	HDD.

Editing Function Setup Others

•Press [TIMER] to check the timer recording in progress.

•As to the timer recording in progress (which is shown in red in the timer program list), you only can edit the end time. The changes made during recording will be recognized as only specific to that recording in progress and it will not affect the daily or the weekly recording setting.

•E23, E27, E28, E31, E32, E33 and E34 are not displayed.

•A program with the error number is grayed in the timer programming list.

•Timer program with an error number will be cleared

once the entry screen for the program is displayed.

*1 PCA is a disc's space reserved for recording test.

Español

EN 47