Roland RD-700 owner manual 115, Chorus/Delay, Flanger/Delay, Chorus/Flanger, Stereo Phaser

Delay Bal (Delay Balance) #

Adjust the volume balance between the flanger sound that is sent through the delay and the flanger sound that is not sent through the delay. With a setting of “D100:0W,” only the flanger sound will be output. With a setting of “D0:100W,” only the flanger sound that is sent through the delay will be output.

Level (Output Level)

Adjust the output level.

37: CHORUS→FLANGR (Chorus→Flanger)

This effect connects a chorus and a flanger in series.

Cho Delay (Chorus Pre Delay Time)

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

Cho Rate (Chorus Rate)

Adjust the modulation speed of the chorus effect.

Cho Depth (Chorus Depth)

Adjust the modulation depth of the chorus effect.

Cho Bal (Chorus Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of “D100:0W,” only the direct sound will be output. With a setting of “D0:100W,” only the chorus sound will be output.

Flg Delay (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Flg Rate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

Flg Depth (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Flg Fbk (Flanger Feedback Level)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Flg Bal (Flanger Balance) #

Adjust the volume balance between the chorus sound and the chorus sound that is passed through the flanger. With a setting of “D100:0W,” only the chorus sound will be output. With a setting of “D0:100W,” only the chorus sound that passes through the flanger will be output.

Level (Output Level)

Adjust the output level.

38: CHORUS/DELAY

This effect connects a chorus and a delay in parallel. The parameters are the same as for “35: CHORUS→DELAY.” However, the parameter adjusts the volume balance between the direct sound and the delay sound.

Effect/Parameter List

39: FLANGER/DELAY

This effect connects a flanger and a delay in parallel. The parameters are the same as for “36: FLANGER→DELAY.” However, the Delay Bal parameter adjusts the volume balance between the direct sound and the delay sound.

40: CHORUS/FLANGER

This effect connects a chorus and a flanger in parallel. The parameters are the same as for “37: CHORUS→FLANGER.” However, the Flg Bal parameter adjusts the volume balance between the direct sound and the flanger sound.

41: STEREO PHASER

With the Step effects, you can also make stepped changes in the pitch of sounds to which the Phaser effect is applied.

Type (Phaser Type)

Selects the type of Phaser.

Type 2 adds more of the Phaser effect to the high frequencies than Type 1.

Mode

Selects the number of stages in the phaser (4/8).

Polarity

Selects whether the left and right phase of the modulation will be the same or the opposite.

INVERSE: The left and right phase will be opposite. When using a mono source, this spreads the sound.

SYNCHRO: The left and right phase will be the same. Select this when inputting a stereo source.

Manual #

Adjusts the center frequency to which the phase effect is applied.

Rate (Phaser Rate) #

Adjust the frequency of modulation.

➔Rate parameter can be set as a note-value of a tempo. In this case, specify the value of the desired note.

Depth (Phaser Depth)

Adjust the depth of modulation.

Resonance (Phaser Resonance)

Adjust the amount of feedback for the phaser. Higher settings will give the sound a stronger character.

Cross Fbk (Cross Feedback Level)

Adjust the proportion (%) of the phaser sound that is to be returned to the input. Positive (+) settings will return the signal to the input with the original phase, while negative (-) settings produce an inverted phase.

Step Rate #

	Adjust the frequency of pitch change.
➔	Step Rate parameter can be set as a note-value of a tempo. In	Appendices
	this case, specify the value of the desired note.

115