Roland RD-700 owner manual Setting the Keyboard Touch, Key Touch, Setting the Device ID Number

Detailed Settings for Each Function ([EDIT])

			Setting the Keyboard Touch
Parameter		Value
			(Key Touch)
Control Channel		1–16, OFF
			You can make advanced settings for the touch used for the
NOTE
			keys.
When the Control Channel settings are transmitted along
with the part’s MIDI receive channel, switching of Setups			How to Make Settings
takes priority over the switching of tones.
			1.
For more information about “Switching Setups” (p. 97).				Press [EDIT], getting the indicator to light.
Setting the Device ID Number			The Edit Menu screen appears.
			fig.Editmenu1.eps_150
(Device ID)
The Device ID number is an identification number used
when transmitting and receiving MIDI Exclusive messages.
When transmitting Exclusive messages, the device ID
numbers of the corresponding devices must be matched.			2.	Press CURSOR [	]/[	] to select “1.Key Touch.”
			3.
Parameter		Value		Press CURSOR [	] to display the Edit screen.
			fig.keytouch1.eps_150
Device ID		17–32
Switching the Pedal’s Polarity
(Pedal Polarity)
Switch the polarity of pedals connected to the RD-700.			4.
				Press CURSOR [	] or [	] to move the cursor to the
This can be set individually for each of the Pedal jacks on the
				parameter to be set.
rear panel (FC1, FC2, DAMPER).
On some pedals, the electrical signal output by the pedal			5.	Press [INC/YES] or [DEC/NO] to set the value.
when it is pressed or released is the opposite of other pedals.			6. When you have finished making the settings, press
If your pedal has an effect opposite of what you expect, set
				[EDIT], extinguishing its indicator.
this parameter to Reverse.
				You are returned to the Tone screen.
If you are using a Roland pedal (that has no polarity switch),
set this parameter to STANDARD.
Parameter		Value
Damper
FC1	STANDARD, REVERSE
FC2							Edit Mode

71