Roland RD-700 Keyboard Part and Controllers, Settings Local Part Param, Constant Velocity

Detailed Settings for Each Function ([EDIT])

NOTE							Keyboard Part and Controllers
							Settings (Local Part Param)
If the Beat Pattern (p. 86) is 1/4, there will be no shuffle effect
even if the Shuffle Rate value is increased.							The sixteen Parts played by the RD-700’s internal sound
							generator are referred to as “Internal Parts.”
Keeping the Force of the Notes							Of the sixteen Internal Parts, you can select three of them to
Constant (Velocity)							function as the three Parts (UPPER1, UPPER2, and LOWER)
							which can be freely controlled with the RD-700’s buttons and
This sets how strongly sounds are played when you press the
							keyboard. These three Parts are collectively known as the
keys.
							“Local Parts.”
							You can perform operations like Split and Layer with the
Parameter		Value			Description
							Local Parts very simply using the RD-700’s keyboard, and
							you can make more detailed settings for the Parts as well.
		REAL		Reproduces the actual strength of
				the keyboard touch.
Velocity							How to Make Settings
		1–127		Sets the velocity at a fixed valued,
				regardless of the keyboard touch.			1. Press [EDIT], getting the indicator to light.
								The Edit Menu screen appears.
Continuing Arpeggios Even After
							fig.Editmenu2.eps_150
the Keys Are Released
(Arpeggio Hold)
When the hold setting is switched on, you can have
arpeggios continue to play even after you release the keys.
							2.	Press CURSOR [	]/[ ] to select “7.Local Part
	Parameter		Value		Description			Param.”
					Arpeggios continue to play	3.		Press CURSOR [	] to display the Edit screen.
			ON		even after the keys are re-
							fig.intext1.eps_150
Arpeggio Hold					leased.
			OFF		Arpeggios stop playing
					when the keys are released.
The [ARPEGGIO] indicator flashes when the Arpeggio Hold							fig.intext2.eps_150
is set to ON.
Switching Hold On and Off with the Buttons
Even when not in the Edit screen, you can use the
buttons to turn the Hold function on and off.
							fig.IntExt3-1.eps_150

1.Hold down [ARPEGGIO] and press [TRANSPOSE]. Hold is turned on or off each time the button is pressed.

4. Press CURSOR [ ] or [ ] to switch screens, and press

CURSOR [ ] or [ ] to move the cursor to the parameter to be set.

5. Press [INC/YES] or [DEC/NO] to set the value.

You can set the “Key Range” by pressing the specified keys.

Edit Mode

87