Selecting Sounds on an External Midi Device | Roland RD-700 instruction

Using the RD-700 As a Master Keyboard

Selecting Sounds on an External MIDI Device

To switch the tones of an external MIDI device, the program number and the

MSB/LSB of the Bank Select message are entered as numerical values on the

RD-700.

fig.panel

CONTROL

2

1

Press [MIDI TX], getting the indicator to light.

If “MSB” doesn’t appear on screen, press CURSOR [ ] several times to display the following screen.

fig.LCD

Parameter	Tx	Settings


MSB (Bank Select MSB)	CC 32	0~127, ---(OFF)

LSB (Bank Select LSB)	CC 00	0~127, ---(OFF)

PC (Program Change)	Program Change	0~127, ---(OFF)

2

Press CURSOR [ ], [ ], [ ], or [ ] to move the cursor, then press [INC/YES] or [DEC/NO] to set the MSB, LSB, and PC for each part.

Pressing [INC/YES] and [DEC/NO] simultaneously switches the settings value to “--- (OFF).”

When this setting is “--- (OFF),” bank select messages will not be transmitted.

1

NOTE

If the external MIDI sound generator transmits a Program number or a Bank number for which no Tone has been assigned, an alternate Tone may be selected, or in some cases, there may be no sound played. If you do not want to transmit the Program number or Bank Select, use the procedure described left to set the PC/MSB/LSB to “--- (OFF).”

Master Keyboard

61

Image 61

Roland RD-700 owner manual Selecting Sounds on an External Midi Device, Parameter Settings

Contents

Page Important Safety Instructions 001 002b Protect the unit from strong impact. Do not drop it Placement Power SupplyMaintenance Additional Precautions Convention Used in This Manual Main Features Contents Using the Convenient Functions in Performances ContentsUsing the RD-700 As a Master Keyboard Making Detailed Settings for the Piano Tones Piano Edit Contents Detailed Settings for Each Function Edit Keyboard Part and Controllers Settings Local Part Param Connecting External Midi DevicesSetting Midi Receive Parts Internal Part Prm Making Arpeggio Settings Arpeggio General Midi Appendices Front Panel Panel Descriptions 11 DEC/NO, INC/YES/ENTER Display FunctionExpansion A, B Rear Panel Getting Ready Installing the Wave Expansion Board Getting Ready Installing SRX Series Boards Will be fastened in place Use the Installation Tool supplied with the Wave ExpansionUse the screws that you removed in to fasten the cover Back in place Selecting Wave Expansion Board Tones Checking the Installed Wave Expansion Boards French language for Canadian Safety Standard Installation de la carte d’extension Wave Appareils reliés au RD-700 Installer les cartes de série SRXSchéma suivant Série SRX SRX A, SRX B tout en enfonçant les supports à Pour tourner les supports en position Lock verrouillé Power pReposez le couvercle en remettant les vis enlevées comme Spécifié à l’étape Before you begin making connections, confirm the following Connecting the RD-700 to External Equipment Connect supplied AC power cable to the RD-700, and plug Connecting PedalsOther end into an AC power outlet Connect the RD-700 and the external device Turning On the Power Turning the Power On and Off Turning Off the Power Adjusting the Volume Press Cursor To select 9.Utility To display the Edit screen Restoring the Factory Settings Factory Reset Press INC/YES Press Cursor to select Factory Reset All Press Cursor To select 0.System To display the Edit screen Adjusting the Display Contrast LCD ContrastPress Cursor or to move the cursor to the LCD Contrast parameter Press Edit to make the indicator go dark Tuning to Other Instruments’ Pitches Master Tune Getting Ready Units of Sound Overview of the RD-700Basic Organization of the RD-700 Tone Main Screens Basic Operation of the RD-700Special Indications About the Function Buttons About the Cursor Buttons Changing the Settings Values Hold down NUM Lock and press Write Listening to the Demo Demo PlayPress Cursor / to select the song that you wish to hear Press Cursor or INC/YES to start playback of the demo song Piano Performances One Touch Piano Performing with the KeyboardPress ONE Touch Piano Performing with the Keyboard Performing with a Variety of TonesTones in Layer and Split Specifying the Tone Number to Select a Tone NUM Lock Press NUM Lock to make the indicator lightEnter the tone number with the Tone Select buttons Press Enter Press Tone Select RHY/GM2 Playing a Rhythm Set Changing Tones Layer and Split Mode p Press Expansion a or B to make its indicator lightSelecting Wave Expansion Board Tones Play the keyboard, and you will hear the selected tone Fig.Q1-10 Wave Expansion Board Rhythm Set Tone Numbers To Turn Off Layer or Split Extinguishing the Indicator To Switch to Single ModePlaying Two Tones on the Keyboard Press ONE Touch Piano Playing with Two Layered Tones Layer Press LAYER, getting the indicator to light Selecting Both Layer and Split Mode Press SPLIT, getting the indicator to lightKeyboard’s Split Hold down Split for several seconds Changing Tones in Layer and Split ModeHold down Split and press a key Range for Each Part Key Range p Part Level Slider Adjusting the Volume Each Part Midi TX Part Hold down Transpose for several seconds Transposing the Key of the Keyboard TransposeHold down Transpose and press a key Transposition for Each Individual Part Key Transpose p Adding Breadth to the Sound Chorus knob Adding Reverberation to the Sound Reverb knob Turn the knobs to adjust the levels in each range Press Equalizer ON/OFF to make its indicator lightSimulating the Creation Organ Tones Tone Wheel Mode p Equalizer Frequency Settings Freq/Q p Creating Arpeggios from the Chords You Play Arpeggio Using the Convenient Functions in Performances For details, refer to Making Arpeggio Settings Arpeggio p Using the Convenient Functions in PerformancesSetting the Way Arpeggios are Played Style p Changing the Arpeggio Style Switching the Intro Ending On or Off Intro Ending p Press Part Switch Rhythm to make the button indicator lightPlaying Rhythm Rhythm Patterns Pattern p Changing Rhythm Tempos Changing the Rhythm PatternRhythm Pattern List p Applying Effects to the Sound When Using Multi-effects in Split or Layer ModeEffect/Parameter List Press SETUP, getting the indicator to light Selecting Stored Settings Setup Try playing the keyboard Selecting Setups Without Pressing NUM Lock Press WRITE, getting the indicator to light Storing Settings to Setups WritePress Cursor to move the cursor to the new Setup name Repeat steps 5-6 to input the name When INC/YES is pressed, saving of the Setup begins Setup Settings Not Saved in a Setup Connecting to External Midi Sound Generators About Midi ConnectorsWhat’s MIDI? Using the RD-700 As a Master Keyboard Midi Send Channel SettingsPress Midi TX, getting the indicator to light Part Settings Description Selecting Sounds on an External Midi Device Parameter Settings Adjust the Volume Level For Individual Parts Adjusting the Volume of Each Part Midi TX Part How to Make Settings Detailed Settings for Transmitted Parts Midi TXAdjusting the Volume and Pan Setting the Key Range LWR/UPR Changing Tone Elements Setting the Transposition for EachIndividual Part Key Transpose Changing the Pitch Coarse Tune/Fine Tune Smoothly Changing the Pitch PortamentoDescription Value Parameter Description Value Parameters Making the settingsSelecting the Piano Sound Changing the Width of the Sound Stereo Width Changing the Sense of Space Surrounding the Sound Ambience Making Detailed Settings for the Piano Tones Piano EditChanging the Amount of Reverb Effect Reverb Level EQ-SW ON, OFF Parameters That Can Be Set Detailed Settings for Each Function Edit Making System Settings System Setting ParametersDetailed Settings for Each Function Edit Cursor Switching Between Reception GM/GM2 System On and GS Reset Adjusting the Volume Master VolumeChanging the Clock Timing Source Clock Source Setting the Device ID Number Setting the Keyboard TouchSwitching the Pedal’s Polarity Pedal Polarity Key Touch Velocity Delay Sens Setting a Constant Volume LevelChanging the Key Touch Response to the Playing Force Param Value Function/Parameter Setting Eter Changed Pedal, Control Knob, and Equalizer Settings Control/EQAssigning Functions to Pedals FC1/FC2 Changing the Equalizer Frequency Settings Freq/Q Changing the Control Knob Settings Control/Src Simulating the Creation of Organ Tones Tone Wheel ModeWhat Are Feet? Changing the Undulation of the Organ Delay Settings Screen Chorus Settings ScreenRHY LWR UP2 UP1 MFX Source, MFX Dest Making Multi-Effects SettingsType MFX Control Setting Chorus and Delay Making Reverb Settings Detailed Settings for Each Function Edit Chorus Feedback Making Tone Settings Tone EditWhen Chorus/Delay is Set to Delay Delay-Center Delay-Left Selecting the Part to Be Set Part, Tone Setting the Reverb/Chorus Depth Reverb/Chorus AmountChanging the Effect Applied to the Tone MFX Playing Sound Monophonically Mono/Poly Creating Smooth Pitch Changes Portamento Switch/TimeChanging the Bend Range Bend Range Adjusting the Tempo Tempo Making the Rhythm Settings Rhythm PatternChanging Patterns Pattern Selecting Rhythm Variations Switching the Intro and Ending On or Off Intro/Ending Making Arpeggio Settings ArpeggioChanging the Drum Set Rhy Set Creating Arpeggios from the Chords You Play Arpeggio p Selecting Parts to Play Arpeggios Dest. Part Setting the Way Arpeggios are Played Style Arpeggio style Octave Range Changing the octave rangeChanging the Order in Which Arpeggio Style List p Accent Rate Beat PatternShuffle Rate Keyboard Part and Controllers Settings Local Part ParamKeeping the Force of the Notes Constant Velocity Setting the Key Range for Each Setting the Change in VolumeAccording to the Force Used to Play the Keyboard Turning the Controllers in Each Part On and Off Setting Midi Receive Parts Internal Part PrmAssigning Internal Parts to Local Parts Part Assign Setting the Volume and Pan Volume/Pan Setting the Receive Channel Receive ChannelMaking the Effect ON/OFF Settings MFX Switch Setting the Required Polyphony Voice Reserve Setting the Tuning Method Temperament/Key Other Functions Utility Settings to an External MidiTransferring the RD-700’s Device Bulk Dump Number Device ID p Factory condition Factory Reset Restoring the settings toFactory Reset All Factory Reset Current Connecting to an External Sequencer Connecting External Midi DevicesSwitch p Recording RD-700 Performances to an External Midi Sequencer Connecting External Midi Devices About the Local SwitchExiting Rec Mode Recording the Performance Switching Setups Setting the ChannelsSwitching Tones Making connections Points to Note Regarding GM Mode Using the RD-700 as a GM Sound Module GM ModePlaying Back GM Scores Problem Check/Solution Troubleshooting 100 TroubleshootingANO? Moved 101 102 Error messages Error Messages/Other MessagesOther Messages 103 104 Effect/Parameter ListStereo EQ Stereo Equalizer Overdrive 105 Effect/Parameter List Rotary 106Compressor Limiter Tremolo CHO Tremolo Chorus 107SPACE-D Stereo Chorus 108 Stereo Delay15 ST.FLANGER Stereo Flanger Step Flanger TRI TAP DLY Triple Tap Delay MOD Delay Modulation Delay109 Time Ctrl DLY Time Control Delay Quad TAP DLY Quadruple Tap Delay110 22 2V PCH Shift 2 Voice Pitch Shifter 111FBK PCH Shift Feedback Pitch Shifter Reverb Gated Reverb 11226 OD→CHORUS Overdrive→Chorus 27 OD→FLANGER Overdrive→Flanger 113 CHORUS→DELAY Chorus→Delay ENHANCR→DELAY Enhancer→DelayFLANGER→DELAY 114 FLANGER/DELAY CHORUS/DELAYStereo Phaser 115 Keysync Flang Keysync Flanger 116Formant Filtr Formant Filter 117 Multi TAP DLY Multi Tap DelayRing Modulat Ring Modulator Shuffle Delay Reverse Delay118 119 48 3D Delay49 3V PCH Shift 3 Voice Pitch Shifter Lofi Compress Lofi Noise 120SP Simulator Speaker Simulator Stereo Compressor 121Stereo Limiter Gate 122Slicer Isolator 60 3D Chorus 12361 3D Flanger Tremolo 124Auto PAN 64 SYM.RESONANCE Sympathetic Resonance 65 OD→ROTARY Overdrive→Rotary 125 Effects Parameter List Limiter Stereo DelayHEXA-CHORUS Tremolo CHO TRI TAP DLY MOD DelayQuad TAP DLY Time Ctrl DLY DISTORTION→DELAY 28 OD→DELAYENHANCR→DELAY CHORUS→DELAY CHORUS/DELAY FLANGER→DELAYFLANGER/DELAY Stereo Phaser Shuffle Delay Reverse DelayMulti TAP DLY 49 3V PCH Shift SP Simulator Lofi Noise55 ST.COMPRESSOR 56 ST.LIMITER 61 3D Flanger 60 3D ChorusTremolo Auto PAN Reverb Parameters DelayChorus Parameters SRV ROOM/SRV HALL/SRV Plate Piano CLAV/MALLET Strings Tone ListPiano Organ PAD 135 GTR/BASSVOICE/SYNTH Tone ListRHYTHM/GM2 BRASS/WINDS 137 138 Rhythm Set ListRD Pop Kit RD Rock Kit RD Jazz Kit RD House Kit 139 140 GM2 Standard GM2 Room GM2 Power GM2 Electric GM2 Analog GM2 Jazz GM2 Brush GM2 Orchstra GM2 SFX 141 142 Arpeggio Style ListStyle Motif Beat Pattern Accent Rate 143 Rhythm Pattern ListRhythm Pattern Recommended Tempo Rhythm Pattern Setup Name Setup List144 145 Shortcut ListWhat to do Operation Receive data Midi Implementation146 Channel Voice Messages 147 Midi ImplementationPitch Bend Change 148 Channel Mode MessagesSystem Realtime Message System Exclusive Message Universal Realtime System Exclusive Messages 149Global Parameter Control Data Transmission 150 151 Data set 1DT1 GM ModeData Transmission Channel Voice Messages Note off Data set 1DT1 152 153 Midi Implementation Parameter Address MapSystem Realtime Messages System Exclusive Messages Setup Common System Onetouch Piano Tone BackupSetup Common MFX 154 Setup Common Reverb Setup Common Chorus155 Setup Midi Tx Part Setup Local PartSetup Internal Part 156 157 Midi Implementation GS Model ID = 42H 158 Drum Setup Parameter Arpeggio Parameter List 159Decimal and Hexadecimal Table 160 How to calculate the checksumExamples of Actual Midi Messages Example of an Exclusive Message and Calculating a Checksum 161 Scale Tune Feature address 40 1xAscii Code Table 162 Midi Implementation Chart 163 Vibrato delay 164 Main Specifications 165 Index 166 Index REV 167 168 Purpose-Oriented Index 169 Memo Asia AfricaAUSTRALIA/ NEW Zealand Europe Avis 02565478 ’04-5-9N