Roland RD-700 owner manual Wave Expansion Board Rhythm Set Tone Numbers, Fig.Q1-10

Performing

Performing with the Keyboard

Selecting Tones Without Pressing [NUM LOCK]

You can select tones stored on expansion boards with [NUM LOCK] off.

1.Press EXPANSION [A] or [B] to make its indicator light.

2.Use the TONE SELECT buttons to specify the tone number.

Wave expansion board tones are assigned to the TONE SELECT buttons

as shown below.

fig.Q1-10

	001	011	021	031	041	051	061	071	081	Rhythm
Tone	:	:	:	:	:	:	:	:	:	Set
Number	010	020	030	040	050	060	070	080	090
									091
									:
									100
									101
									:

3.Press [DEC/NO] or [INC/YES] to select the tone.

The TONE SELECT button included in the selected Tone numbers flash.

4.Either press the flashing TONE SELECT button or play the keyboard. The TONE SELECT button stops flashing and remains lit, and the selected tone is set.

Wave Expansion Board Rhythm Set Tone Numbers

When selecting a Wave Expansion Board Rhythm Set with the RD-700, the Wave Expansion Board Rhythm Sets are placed after Patches (called Tones on the RD-700).

Thus, when you want to specify a Wave Expansion Board Rhythm Set in terms of a Tone number, the Tone number can be arrived at by adding the desired Rhythm Set number in the Rhythm Set List to the last Patch number in the Patch List.

40