Roland RD-700 owner manual Specifying the Tone Number to Select a Tone NUM Lock, Press Enter

Performing with the Keyboard

Specifying the Tone Number to Select a Tone ([NUM LOCK])

Each individual tone has a different tone number.

You can select tones with the TONE SELECT buttons by inputting numerals with these buttons to specify tone numbers.

Turn [NUM LOCK] on when inputting numerals with the TONE SELECT buttons.

For more on the RD-700’s internal tones, refer to the “Tone List” (p. 135).

fig.panel

CONTROL

14

1

Press ONE TOUCH [PIANO].

This selects a single tone to be played over the entire keyboard.

2

Press [NUM LOCK] to make the indicator light.

This enables input of numerals with the TONE SELECT buttons.

The numerical value that can be entered with each button is indicated beneath the buttons.

3

Enter the tone number with the TONE SELECT buttons.

The screen Tone name flashes.

4

Press [ENTER].

The tone is set.

Play the keyboard, and you will hear the selected tone.

When [NUM LOCK] is turned off, the TONE SELECT buttons included in the selected Tone numbers lit.

32

When changing tones in Layer mode (p. 42) or Split mode (p. 43), select the part for which the tone is to be changed with the PART SELECT buttons, without pressing the ONE TOUCH [PIANO] button. For details, refer to “Changing

Tones in Layer and Split

Mode” (p. 44).

Performing

37