Performing with the Keyboard

Changing the Keyboard’s Split Point

You can change the point at which the keyboard is divided (the Split Point) in Split mode.

1

Hold down [SPLIT] for several seconds.

A screen such as the following appears, and the current value of the setting is displayed.

fig.LCD

2

Hold down [SPLIT] and press a key.

When you release [SPLIT], the previous display will reappear.

The split-point key is included in the UPPER section.

Changing Tones in Layer and Split Mode

When you want to change tones in Layer and Split mode, use the PART SELECT buttons to specify the part for which the tone is to be changed.

fig.panel

You can freely set the ranges for UPPER1, UPPER2, and LOWER as you prefer. For details, refer to “Setting the Key

Range for Each Part (Key

Range)” (p. 88).

Performing

CONTROL

2 1

1

Press the PART SELECT button for the part whose tone you

want to change, causing the part’s indicator to light up.

The indicator for the currently selected TONE SELECT button lights up in the same color as the indicator for the selected part.

However, the TONE SELECT buttons do not light when [NUM LOCK] is on.

2

Select the tone category with a TONE SELECT button, then

press [INC/YES] or [DEC/NO] to select the tone.

When [NUM LOCK] is on, you can specify tone numbers with the TONE

SELECT buttons (p. 37).

44

Page 44
Image 44
Roland RD-700 Changing Tones in Layer and Split Mode, Hold down Split for several seconds, Hold down Split and press a key