Roland RD-700 owner manual 124, Tremolo, Auto PAN, 64 SYM.RESONANCE Sympathetic Resonance

Appendices

Effect/Parameter List

Cutoff (Cutoff Frequency)

Sets the cutoff frequency when a specific frequency band is cut off by a filter.

StpRateSw (Step Rate Switch)

Determines whether the pitch is changed in a stepped fashion (ON) or not (OFF).

Step Rate #

Adjust the rate at which the pitch will change.

➔Step Rate parameter can be set as a note-value of a tempo. In this case, specify the value of the desired note.

Out (Output Mode)

Adjust the method that will be used to hear the output sound. The optimal 3D effect will be achieved if you select SPEAKER when using speakers, or PHONES when using headphones.

Low Gain

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Balance #

Adjust the volume balance between the direct sound and the flanger sound.

With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the flanger sound will be output.

Level (Output Level)

Adjust the output level.

62: TREMOLO

Tremolo cyclically modulates the volume to add tremolo effect to the sound.

Mod Wave (Modulation Wave)

TRI: The sound will be modulated like a triangle wave.

SQR: The sound will be modulated like a square wave.

SIN: The sound will be modulated like a sine wave.

SAW1/2: The sound will be modulated like a sawtooth wave. The teeth in SAW1 and SAW2 point at opposite directions.

Rate #

Adjust the frequency (speed) of the change.

➔Rate parameter can be set as a note-value of a tempo. In this case, specify the value of the desired note.

Depth #

Sets the depth to which the effect is applied.

Low Gain

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Level (Output Level)

Adjust the output level.

63: AUTO PAN

The Auto Pan effect cyclically modulates the stereo location of the sound.

Mod Wave (Modulation Wave)

TRI: The sound will be modulated like a triangle wave.

SQR: The sound will be modulated like a square wave.

SIN: The sound will be modulated like a sine wave.

SAW1/2: The sound will be modulated like a sawtooth wave. The teeth in SAW1 and SAW2 point at opposite directions.

Rate #

Adjust the frequency (speed) of the change.

➔Rate parameter can be set as a note-value of a tempo. In this case, specify the value of the desired note.

Depth #

Sets the depth to which the effect is applied.

Low Gain

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Level (Output Level)

Adjust the output level.

64:SYM.RESONANCE (Sympathetic Resonance)

When you depress the damper pedal on an acoustic piano, the sound from the strings that were struck resonates with other strings, adding rich reverberations and broadness to the sound. This effect simulates the resonance, called “Sympathetic Resonance.”

Depth

Adjust the depth of Sympathetic Resonance.

Damper

This is controlled by a normal damper pedal, with the resonance setting corresponding to the amount the pedal is pressed.

Pre LPF

This sets the reference frequency for the low-end input cutoff filter.

Pre HPF

This sets the reference frequency for the high-end input cutoff filter. When not cutting bass frequencies, set this to BYPASS.

124