Roland RD-700 114, ENHANCR→DELAY Enhancer→Delay, CHORUS→DELAY Chorus→Delay, Flanger→Delay

Appendices

Effect/Parameter List

Flg Bal (Flanger Balance) #

Adjust the volume balance between the enhancer sound that is sent through the flanger and the enhancer sound that is not sent through the flanger. With a setting of “D100:0W,” only the enhancer sound will be output. With a setting of “D0:100W,” only the enhancer sound that is sent through the flanger will be output.

Level (Output Level)

Adjust the output level.

34: ENHANCR→DELAY (Enhancer→Delay)

This effect connects an enhancer and a delay in series.

Enh Sens (Enhancer Sensitivity) #

Adjust the sensitivity of the enhancer.

Enh Mix (Enhancer Mix Level)

Adjust the ratio with which the overtones generated by the enhancer are combined with the direct sound.

DelayTime

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Delay Fbk (Delay Feedback Level)

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HFDmp (Delay HF Damp)

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not want to cut the high frequencies of the delay feedback, set this parameter to

BYPASS.

Delay Bal (Delay Balance) #

Adjust the volume balance between the enhancer sound that is sent through the delay and the enhancer sound that is not sent through the delay. With a setting of “D100:0W,” only the enhancer sound will be output. With a setting of “D0:100W,” only the enhancer sound that is sent through the delay will be output.

Level (Output Level)

Adjust the output level.

35: CHORUS→DELAY (Chorus→Delay)

This effect connects a chorus and a delay unit in series.

Cho Delay (Chorus Pre Delay Time)

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

Cho Rate (Chorus Rate)

Adjust the modulation speed of the chorus effect.

Cho Depth (Chorus Depth)

Adjust the modulation depth of the chorus effect.

Cho Bal (Chorus Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of “D100:0W,” only the direct sound will be output. With a setting of “D0:100W,” only the chorus sound will be output.

DelayTime

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Delay Fbk (Delay Feedback Level)

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HFDmp (Delay HFDamp)

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not want to cut the high frequencies of the feedback, set this parameter to BYPASS.

Delay Bal (Delay Balance) #

Adjust the volume balance between the chorus sound that is sent through the delay and the chorus sound that is not sent through the delay. With a setting of “D100:0W,” only the chorus sound will be output. With a setting of “D0:100W,” only the chorus sound that is sent through the delay will be output.

Level (Output Level)

Adjust the output level.

36: FLANGER→DELAY

This effect connects a flanger and a delay in series.

Flg Delay (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

Flg Rate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

Flg Depth (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Flg Fbk (Flanger Feedback Level)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Flg Bal (Flanger Balance) #

Adjust the volume balance between the direct sound and the flanger sound. With a setting of “D100:0W,” only the direct sound will be output. With a setting of “D0:100W,” only the flanger sound will be output.

DelayTime

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Delay Fbk (Delay Feedback Level)

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

Dly HFDmp (Delay HFDamp)

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not want to cut the high frequencies of the delay feedback, set this parameter to

BYPASS.

114