Roland RD-700 Restoring the settings to, Factory condition Factory Reset, Factory Reset All

Edit Mode

Detailed Settings for Each Function ([EDIT])

Restoring the settings to the			6.	Press [INC/YES].
factory condition (Factory Reset)			fig.LCD	The confirmation message appears.
The settings stored in the RD-700 can be returned to their
factory settings.
NOTE
Executing “Factory Reset All” results in deletion of the
Setups (p. 54). If you want to keep any data you have stored,				To cancel the Factory Reset, press [DEC/NO].
use the “Bulk Dump SETUP” operation to save the data to an
external sequencer (p. 92).			7.	Press [INC/YES] once again to start the Factory Reset
1. Press [EDIT], getting the indicator to light.				operation.
	The Edit Menu screen appears.		NOTE
fig.Editmenu2.eps_150
			Never turn off the power during Factory Reset (while “Now,
			Executing” appears in the display).
			8.	After the Factory Reset operation is finished, the display
				will indicate “COMPLETED.”
2.				The Tone screen returns to the display.
	Press CURSOR [	] to select “9.Utility.”
3.	Press CURSOR [	] to display the Edit screen.	Factory Reset All
fig.utility1.eps_150			5	Press CURSOR [ ].
				A screen like the one shown below appears.
			fig.LCD

4.Press CURSOR [ ] or [ ] to select “Factory Reset Current” or “Factory Reset All.”

		6.	Press [INC/YES].
Parameter	Value
			The confirmation message appears.
Factory Reset	The currently selected Setup returned to	fig.LCD
Current	their factory settings.
Factory Reset	The settings stored in the RD-700 can be
All	returned to their factory settings.
NOTE
While the Factory Reset is in progress, no sounds are
			To cancel the Factory Reset, press [DEC/NO].
produced even when the keys are pressed. In addition,
Rhythms and arpeggios being played are also stopped.		7.	Press [INC/YES] once again to start the Factory Reset
Factory Reset Current			operation.
5. Press CURSOR [ ].		NOTE
		Never turn off the power during Factory Reset (while “Now,
A screen like the one shown below appears.
		Executing” appears in the display).
fig.LCD
		8. After the Factory Reset operation is finished, the display
			will indicate “COMPLETED.”
			The Tone screen returns to the display.

94