Other Functions Utility, Transferring the RD-700’s | Roland

Detailed Settings for Each Function ([EDIT])

	Other Functions (Utility)				5. Press CURSOR [			] or [ ] to select “Bulk Dump
					Temporary” or “Bulk Dump SETUP.”
	Utility includes functions for sending data to external MIDI				Temporary” or “Bulk Dump SETUP.”

	sequencers and other devices and for restoring the settings to				Parameter			Value
	their original factory state.

					Bulk Dump			The contents of the currently se-
					Bulk Dump			The contents of the currently se-
					Temporary			lected Setup are transmitted.

	For more on “Rec Setting” in Utility menu, refer to “Settings				Bulk Dump SETUP			The contents of Setups in the
	for Recording (Rec Setting)” (p. 95).				Bulk Dump SETUP			specified range are transmitted.
	for Recording (Rec Setting)” (p. 95).							specified range are transmitted.

	Transferring the RD-700’s				NOTE
	Transferring the RD-700’s				While the Bulk Dump is in progress, no sounds are produced
	Settings to an External MIDI				While the Bulk Dump is in progress, no sounds are produced
	Settings to an External MIDI				even when the keys are pressed. In addition, Rhythms and
	Device (Bulk Dump)				even when the keys are pressed. In addition, Rhythms and
	Device (Bulk Dump)				arpeggios being played are also stopped.
	You can transfer the contents of Setups and the RD-700’s				Bulk Dump Temporary
	system settings to an external MIDI device. This operation is				Bulk Dump Temporary
	called “bulk dump.”				6. Press CURSOR [		].
	Use this procedure to save the data to an external MIDI				6. Press CURSOR [		].
	Use this procedure to save the data to an external MIDI				A screen like the one shown below appears.
	device in situations such as when you want to perform by				A screen like the one shown below appears.
	device in situations such as when you want to perform by				fig.Editmenu2.eps_150
	connecting another RD-700 with the same settings, or to				fig.Editmenu2.eps_150


	prevent your Setups and system settings from corruption.

1.Use a MIDI cable (optional) to connect the RD-700’s MIDI OUT connector to the MIDI IN connector on an external sequencer.

2.	Press [EDIT] to turn it on.				7.	Put the external sequencer in record mode.
	The Edit Menu screen appears.				8.	Press [INC/YES] to transmit the settings.
fig.Editmenu2.eps_150						To cancel the Bulk Dump, press [DEC/NO].


						The message “Now, Executing...” appears in the display
						during transmission of the data.
					9.	After the transmitting is finished, the display will
3.						indicate “COMPLETED.”
3.	Press CURSOR [		] to select “9.Utility.”			You are returned to the Edit screen.
4.	Press CURSOR [		] to display the Edit screen.		10. Stop the external sequencer.
4.	Press CURSOR [		] to display the Edit screen.
fig.utility1.eps_150

Edit Mode

92

Image 92

Roland owner manual Other Functions Utility, Transferring the RD-700’s, Settings to an External Midi, Device Bulk Dump

Contents

Page Important Safety Instructions 001 002b Protect the unit from strong impact. Do not drop it Power Supply PlacementMaintenance Additional Precautions Main Features Convention Used in This Manual Contents Contents Using the Convenient Functions in PerformancesUsing the RD-700 As a Master Keyboard Making Detailed Settings for the Piano Tones Piano Edit Contents Detailed Settings for Each Function Edit Connecting External Midi Devices Keyboard Part and Controllers Settings Local Part ParamSetting Midi Receive Parts Internal Part Prm Making Arpeggio Settings Arpeggio Appendices General Midi Panel Descriptions Front Panel Expansion A, B Display Function11 DEC/NO, INC/YES/ENTER Rear Panel Installing the Wave Expansion Board Getting Ready Installing SRX Series Boards Getting Ready Use the Installation Tool supplied with the Wave Expansion Will be fastened in placeUse the screws that you removed in to fasten the cover Back in place Checking the Installed Wave Expansion Boards Selecting Wave Expansion Board Tones Installation de la carte d’extension Wave French language for Canadian Safety Standard Installer les cartes de série SRX Appareils reliés au RD-700Schéma suivant Série SRX SRX A, SRX B tout en enfonçant les supports à Power p Pour tourner les supports en position Lock verrouilléReposez le couvercle en remettant les vis enlevées comme Spécifié à l’étape Connecting the RD-700 to External Equipment Before you begin making connections, confirm the following Connecting Pedals Connect supplied AC power cable to the RD-700, and plugOther end into an AC power outlet Connect the RD-700 and the external device Turning the Power On and Off Turning On the Power Adjusting the Volume Turning Off the Power Restoring the Factory Settings Factory Reset Press Cursor To select 9.Utility To display the Edit screen Press Cursor to select Factory Reset All Press INC/YES Adjusting the Display Contrast LCD Contrast Press Cursor To select 0.System To display the Edit screenPress Cursor or to move the cursor to the LCD Contrast parameter Tuning to Other Instruments’ Pitches Master Tune Press Edit to make the indicator go dark Getting Ready Overview of the RD-700 Units of SoundBasic Organization of the RD-700 Tone Basic Operation of the RD-700 Main ScreensSpecial Indications About the Function Buttons Changing the Settings Values About the Cursor Buttons Listening to the Demo Demo Play Hold down NUM Lock and press WritePress Cursor / to select the song that you wish to hear Press Cursor or INC/YES to start playback of the demo song Press ONE Touch Piano Performing with the KeyboardPiano Performances One Touch Piano Tones in Layer and Split Performing with a Variety of TonesPerforming with the Keyboard Press NUM Lock to make the indicator light Specifying the Tone Number to Select a Tone NUM LockEnter the tone number with the Tone Select buttons Press Enter Playing a Rhythm Set Press Tone Select RHY/GM2 Press Expansion a or B to make its indicator light Changing Tones Layer and Split Mode pSelecting Wave Expansion Board Tones Play the keyboard, and you will hear the selected tone Wave Expansion Board Rhythm Set Tone Numbers Fig.Q1-10 To Switch to Single Mode To Turn Off Layer or Split Extinguishing the IndicatorPlaying Two Tones on the Keyboard Press ONE Touch Piano Press LAYER, getting the indicator to light Playing with Two Layered Tones Layer Keyboard’s Split Press SPLIT, getting the indicator to lightSelecting Both Layer and Split Mode Changing Tones in Layer and Split Mode Hold down Split for several secondsHold down Split and press a key Range for Each Part Key Range p Adjusting the Volume Each Part Midi TX Part Part Level Slider Transposing the Key of the Keyboard Transpose Hold down Transpose for several secondsHold down Transpose and press a key Transposition for Each Individual Part Key Transpose p Adding Reverberation to the Sound Reverb knob Adding Breadth to the Sound Chorus knob Press Equalizer ON/OFF to make its indicator light Turn the knobs to adjust the levels in each rangeSimulating the Creation Organ Tones Tone Wheel Mode p Equalizer Frequency Settings Freq/Q p Using the Convenient Functions in Performances Creating Arpeggios from the Chords You Play Arpeggio Using the Convenient Functions in Performances For details, refer to Making Arpeggio Settings Arpeggio pSetting the Way Arpeggios are Played Style p Changing the Arpeggio Style Press Part Switch Rhythm to make the button indicator light Switching the Intro Ending On or Off Intro Ending pPlaying Rhythm Rhythm Patterns Pattern p Rhythm Pattern List p Changing the Rhythm PatternChanging Rhythm Tempos Effect/Parameter List When Using Multi-effects in Split or Layer ModeApplying Effects to the Sound Selecting Stored Settings Setup Press SETUP, getting the indicator to light Selecting Setups Without Pressing NUM Lock Try playing the keyboard Press Cursor to move the cursor to the new Setup name Storing Settings to Setups WritePress WRITE, getting the indicator to light When INC/YES is pressed, saving of the Setup begins Repeat steps 5-6 to input the name Settings Not Saved in a Setup Setup What’s MIDI? About Midi ConnectorsConnecting to External Midi Sound Generators Midi Send Channel Settings Using the RD-700 As a Master KeyboardPress Midi TX, getting the indicator to light Part Settings Description Parameter Settings Selecting Sounds on an External Midi Device Adjusting the Volume of Each Part Midi TX Part Adjust the Volume Level For Individual Parts Detailed Settings for Transmitted Parts Midi TX How to Make SettingsAdjusting the Volume and Pan Setting the Key Range LWR/UPR Individual Part Key Transpose Setting the Transposition for EachChanging Tone Elements Smoothly Changing the Pitch Portamento Changing the Pitch Coarse Tune/Fine TuneDescription Value Parameter Description Value Making the settings ParametersSelecting the Piano Sound Changing the Width of the Sound Stereo Width Making Detailed Settings for the Piano Tones Piano Edit Changing the Sense of Space Surrounding the Sound AmbienceChanging the Amount of Reverb Effect Reverb Level EQ-SW ON, OFF Detailed Settings for Each Function Edit Parameters That Can Be Set Setting Parameters Making System Settings SystemDetailed Settings for Each Function Edit Cursor Changing the Clock Timing Source Clock Source Adjusting the Volume Master VolumeSwitching Between Reception GM/GM2 System On and GS Reset Setting the Keyboard Touch Setting the Device ID NumberSwitching the Pedal’s Polarity Pedal Polarity Key Touch Setting a Constant Volume Level Velocity Delay SensChanging the Key Touch Response to the Playing Force Assigning Functions to Pedals FC1/FC2 Pedal, Control Knob, and Equalizer Settings Control/EQParam Value Function/Parameter Setting Eter Changed Changing the Control Knob Settings Control/Src Changing the Equalizer Frequency Settings Freq/Q Tones Tone Wheel Mode Simulating the Creation of OrganWhat Are Feet? Changing the Undulation of the Organ Chorus Settings Screen Delay Settings ScreenRHY LWR UP2 UP1 Making Multi-Effects Settings MFX Source, MFX DestType MFX Control Making Reverb Settings Setting Chorus and Delay Making Tone Settings Tone Edit Detailed Settings for Each Function Edit Chorus FeedbackWhen Chorus/Delay is Set to Delay Delay-Center Delay-Left Setting the Reverb/Chorus Depth Reverb/Chorus Amount Selecting the Part to Be Set Part, ToneChanging the Effect Applied to the Tone MFX Playing Sound Monophonically Mono/Poly Portamento Switch/Time Creating Smooth Pitch ChangesChanging the Bend Range Bend Range Making the Rhythm Settings Rhythm Pattern Adjusting the Tempo TempoChanging Patterns Pattern Selecting Rhythm Variations Making Arpeggio Settings Arpeggio Switching the Intro and Ending On or Off Intro/EndingChanging the Drum Set Rhy Set Creating Arpeggios from the Chords You Play Arpeggio p Setting the Way Arpeggios are Played Style Selecting Parts to Play Arpeggios Dest. Part Changing the octave range Arpeggio style Octave RangeChanging the Order in Which Arpeggio Style List p Shuffle Rate Beat PatternAccent Rate Settings Local Part Param Keyboard Part and ControllersKeeping the Force of the Notes Constant Velocity Setting the Change in Volume Setting the Key Range for EachAccording to the Force Used to Play the Keyboard Assigning Internal Parts to Local Parts Part Assign Setting Midi Receive Parts Internal Part PrmTurning the Controllers in Each Part On and Off Setting the Receive Channel Receive Channel Setting the Volume and Pan Volume/PanMaking the Effect ON/OFF Settings MFX Switch Setting the Required Polyphony Voice Reserve Setting the Tuning Method Temperament/Key Settings to an External Midi Other Functions UtilityTransferring the RD-700’s Device Bulk Dump Number Device ID p Restoring the settings to Factory condition Factory ResetFactory Reset All Factory Reset Current Connecting External Midi Devices Connecting to an External SequencerSwitch p Recording RD-700 Performances to an External Midi Sequencer About the Local Switch Connecting External Midi DevicesExiting Rec Mode Recording the Performance Setting the Channels Switching SetupsSwitching Tones Making connections Playing Back GM Scores Using the RD-700 as a GM Sound Module GM ModePoints to Note Regarding GM Mode Troubleshooting Problem Check/Solution ANO? Troubleshooting100 101 Moved 102 Error Messages/Other Messages Error messagesOther Messages 103 Effect/Parameter List 104Stereo EQ Stereo Equalizer Overdrive Effect/Parameter List 105 106 RotaryCompressor Limiter 107 Tremolo CHO Tremolo ChorusSPACE-D Stereo Chorus Stereo Delay 10815 ST.FLANGER Stereo Flanger Step Flanger 109 MOD Delay Modulation DelayTRI TAP DLY Triple Tap Delay 110 Quad TAP DLY Quadruple Tap DelayTime Ctrl DLY Time Control Delay 111 22 2V PCH Shift 2 Voice Pitch ShifterFBK PCH Shift Feedback Pitch Shifter Reverb 112 Gated Reverb26 OD→CHORUS Overdrive→Chorus 27 OD→FLANGER Overdrive→Flanger 113 ENHANCR→DELAY Enhancer→Delay CHORUS→DELAY Chorus→DelayFLANGER→DELAY 114 CHORUS/DELAY FLANGER/DELAYStereo Phaser 115 Formant Filtr Formant Filter 116Keysync Flang Keysync Flanger Ring Modulat Ring Modulator Multi TAP DLY Multi Tap Delay117 118 Reverse DelayShuffle Delay 48 3D Delay 11949 3V PCH Shift 3 Voice Pitch Shifter Lofi Compress SP Simulator Speaker Simulator 120Lofi Noise Stereo Limiter 121Stereo Compressor 122 GateSlicer Isolator 61 3D Flanger 12360 3D Chorus 124 TremoloAuto PAN 64 SYM.RESONANCE Sympathetic Resonance 125 65 OD→ROTARY Overdrive→Rotary Effects Parameter List Stereo Delay LimiterHEXA-CHORUS Tremolo CHO MOD Delay TRI TAP DLYQuad TAP DLY Time Ctrl DLY 28 OD→DELAY DISTORTION→DELAYENHANCR→DELAY CHORUS→DELAY FLANGER→DELAY CHORUS/DELAYFLANGER/DELAY Stereo Phaser Reverse Delay Shuffle DelayMulti TAP DLY 49 3V PCH Shift Lofi Noise SP Simulator55 ST.COMPRESSOR 56 ST.LIMITER 60 3D Chorus 61 3D FlangerTremolo Auto PAN Delay Reverb ParametersChorus Parameters SRV ROOM/SRV HALL/SRV Plate Tone List Piano CLAV/MALLET StringsPiano Organ PAD 135 Tone List GTR/BASSVOICE/SYNTHRHYTHM/GM2 BRASS/WINDS 137 RD Pop Kit RD Rock Kit RD Jazz Kit RD House Kit Rhythm Set List138 139 GM2 Standard GM2 Room GM2 Power GM2 Electric GM2 Analog 140 141 GM2 Jazz GM2 Brush GM2 Orchstra GM2 SFX Style Motif Beat Pattern Accent Rate Arpeggio Style List142 Rhythm Pattern List 143Rhythm Pattern Recommended Tempo Rhythm Pattern 144 Setup ListSetup Name What to do Operation Shortcut List145 Midi Implementation Receive data146 Channel Voice Messages Pitch Bend Change Midi Implementation147 Channel Mode Messages 148System Realtime Message System Exclusive Message Global Parameter Control 149Universal Realtime System Exclusive Messages 150 Data Transmission Data set 1DT1 GM Mode 151Data Transmission Channel Voice Messages Note off Data set 1DT1 152 Midi Implementation Parameter Address Map 153System Realtime Messages System Exclusive Messages System Onetouch Piano Tone Backup Setup CommonSetup Common MFX 154 155 Setup Common ChorusSetup Common Reverb Setup Local Part Setup Midi Tx PartSetup Internal Part 156 Midi Implementation GS Model ID = 42H 157 Drum Setup Parameter 158 Decimal and Hexadecimal Table 159Arpeggio Parameter List How to calculate the checksum 160Examples of Actual Midi Messages Example of an Exclusive Message and Calculating a Checksum Ascii Code Table Scale Tune Feature address 40 1x161 Midi Implementation Chart 162 Vibrato delay 163 Main Specifications 164 Index 165 Index 166 167 REV Purpose-Oriented Index 168 Memo 169 Africa AsiaAUSTRALIA/ NEW Zealand Europe Avis 02565478 ’04-5-9N