Roland RD-700 owner manual Troubleshooting, 100, Ano?

Appendices

Troubleshooting

Problem	Check/Solution
	Did you call up a Setup?
	• When a Setup is called up, the cur-
	rent Tone, effect, and other settings
	are disabled, and the selected Set-
	up goes into effect (p. 54). Resave
	required settings to a Setup (p. 56).
	Did you press ONE TOUCH [PI-
	ANO]?
Tones Are Al-	• When ONE TOUCH [PIANO] is
	pressed, the current Tone, effect,
tered
	and other settings are disabled,
	and settings for use in piano per-
	formances go into effect (p. 35). Re-
	save required settings to a Setup
	(p. 56).
	Is the Tone Control function assigned
	to the [CONTROL] knob?
	• Check the Control/EQ Control set-
	tings in Edit mode (p. 74).
When UPPER	Are the UPPER Part and the LOWER
Tone is Select-
	Part set to the same value in the Local
ed, LOWER
	Part Param Part Assign settings in
Changes to
	Edit mode (p. 89)?
Same Tone
	Is [MIDI TX] set to ON?
	• When [MIDI TX] is set to ON, the
	external sound generator is con-
	trolled. To change the RD-700’s
Tone Doesn’t	Tones and make settings in Key-
	board mode, set [MIDI TX] to OFF
Change/Key-	(p. 59).
board Not
	Is the PART SELECT button for the
Switching to
	Part containing the Tone you want to
Split or Layer
	change set to ON (p. 44)?
	Is [NUM LOCK] on?
	• Tone categories cannot be selected
	with the TONE SELECT buttons
	when [NUM LOCK] is on.
Tone Doesn’t	Could you have the Tone Wheel
	screen appearing in the display?
Change When a
	(p. 75)
TONE SELECT	• In the Tone Wheel screen, pressing
Button is	a TONE SELECT button selects
Pressed	one of the Tone Wheels from 1
	through 10.
Rhythm Not	Set the Part 10 Receive Channel set-
	ting in Internal Part Prm in Edit
Sounding
	mode to 10 (p. 90).

Problem	Check/Solution
	Has the System Clock Source setting
	in Edit mode been set to MIDI (p. 70)?
	Do you have an external MIDI device
	connected?
	• You cannot set the tempo with the
	RD-700 when Clock Source is set to
	MIDI. Accordingly, if no external
	MIDI device is connected, then no
Rhythm Not	tempo setting is made for the
	Rhythm, and so the Rhythm does
Sounding
	not sound.
	Is the MIDI TX screen (p. 59) active?
	• Rhythms do not play when the
	MIDI TX screen appears in the dis-
	play. Press [MIDI TX] so that the
	button’s indicator light goes off.
	In Edit mode, is the Rhythm Pattern’s
	Pattern setting turned OFF (p. 82)?
Rhythm Intro	Is the MIDI TX Part’s PART SWITCH
Not Played/	[RHYTHM] turned on?
Rhythm Not	• Are the Local Part’s Rhythm and
Starting From	the MIDI TX Part’s Rhythms syn-
Beginning	chronized (p. 51)?
	Is a Tone Wheel 1–10 Tone selected?
	Effects are applied differently to the
	Tone Wheel than they are with other
	effects.
	• Effects set in MFX/Reverb/Chorus
	MFX Source (p. 77) are applied re-
	gardless of each Part MFX Switch
	ON/OFF setting in the Internal
	Part Prm settings (p. 90), or the
	MFX setting for each Tone in the
Effects Not Ap-	Tone Edit (p. 80).
	• When Tone Wheel is selected for
plied/Effects	multiple Parts, it is applied to all
Sound Wrong	the Parts, regardless of whether the
	Rx Bender Switch and Rx Hold-1
	Switch in the Internal Part Prm set-
	tings are ON or OFF (p. 91).
	Is MULTI EFFECTS [ON/OFF] set to
	OFF (p. 53)?
	Is the [CONTROL] knob set to MFX
	Control?
	• In Edit mode, set the Control set-
	ting in MFX/Reverb/Chorus to
	MFX CONTROL (p. 77).

100