Press Equalizer ON/OFF to make its indicator light

Performing with the Keyboard

Changing the Sound’s Pitch in Real Time (Bender/Modulation Lever)

While playing the keyboard, move the lever to the left to lower the pitch, or to the right to raise the pitch. This is known as Pitch Bend.

You can also apply vibrato by manipulating the lever away from you. This is known as Modulation.

If you move the lever away from you and at the same time move it to the right or left, you can apply both effects simultaneously.

fig.Q1-27

BENDER	BENDER
Pitch Bend	Modulation

Adjusting the Level of the Sound’s Low, Mid, and High-Frequency Ranges (EQUALIZER)

NOTE

The effect obtained when you move the lever may differ according to the tone being used. Additionally, the effect applied by moving the lever is predetermined for each tone, and cannot be changed.

When the Tone Wheel screen is displayed, the Pitch Bend Lever is set so that tilting the lever from left to right switches the Rotary effect from fast to slow. For details, refer to

“Simulating the Creation

of Organ Tones (Tone Wheel Mode)” (p. 75).

Performing

The RD-700 is equipped with a three-band equalizer.

You can adjust the levels of the low-frequency, midrange, and high- frequency ranges using the EQUALIZER [LOW], [MID], and [HIGH] knobs, respectively.

fig.Q1-28