Roland RD-700 owner manual Changing the Control Knob Settings Control/Src

Detailed Settings for Each Function ([EDIT])

Edit Mode

Changing the [CONTROL] Knob Settings (Control/Src)

Normally, the [CONTROL] knob is used for making settings that adjust the multi-effects (MFX Control), but they can also be used for settings that change the way tones are played or the tempo.

Parameter	Value	Description
	OFF
		The [CONTROL] knob
	MFX CONTROL	adjusts the amount of
		multi-effect applied.
Control
		The [CONTROL] knob
	TONE CONTROL	changes the way tones
		are played.
	TEMPO	The [CONTROL] knob
	CONTROL	changes the tempo.
		This setting deter-
		mines the MIDI mes-
		sages that will be used
	CC1–CC31,	for transmitting the
	CC33–CC95,	settings of the [CON-
Src	96: PITCH BEND,	TROL] knob. MIDI
	97:	messages are not
	AFTER TOUCH	transmitted when
		TEMPO CONTROL is
		selected for the Con-
		trol.

NOTE

When TONE CONTROL is assigned to Control, you cannot change the parameters affected by the [CONTROL] knob. The parameters that are changed are predetermined for each individual Tone.

Additionally, effects may not be applied to some Tones (for example GM Tones).

When Control is set to TONE CONTROL, turning the [CONTROL] knob changes the way the tone is played, regardless of whether MULTIEFFECT [ON/OFF] is switched on or off.

Changing the Equalizer Frequency Settings (Freq/Q)

This changes the EQUALIZER knob frequency settings.

Parameter	Value	Description
		Selects the frequency
		for the low-frequency
EQ Low		equalizer. This general-
	200, 400 Hz	ly changes the level of
Freq
		the frequency range ex-
		tending below this
		point.
	200, 250, 315, 400,	Set Frequency Point for
		the mid-frequency
	500, 630, 1000,
		equalizer. Changes the
EQ Mid	1250, 1600, 2000,
		level of the selected fre-
Freq	2500, 3150, 4000,
		quency range, with fre-
	5000, 6300, 8000
		quency selected here at
	Hz
		the center.
		Adjusts the “Q” (band-
		width) of mid-frequen-
	0.5, 1.0, 2.0, 4.0,	cy equalization. The
EQ Mid-Q		higher the value, the
	8.0
		narrower the range of
		frequencies that are af-
		fected.
		Selects the frequency
		for the low-frequency
EQ High	2000, 4000, 8000	equalizer. This general-
		ly changes the level of
Freq	Hz
		the frequency range ex-
		tending above this
		point.
		Selects the frequency
		range for the Gain set-
<Band>	LOW, MID,	ting. Corresponds to
	HIGH	the LOW, MID, and
		HIGH EQUALIZER
		knobs.
		The gain of the range
		determined by <Band>
Gain	-12.0–+12.0 dB	can be changed. You
	(0.2 dB steps)	can also change this
		value by turning the
		[EQUALIZER] knob.

NOTE

With the System’s EQ Control set to SYSTEM (p. 70), you cannot change the above parameters. “---” appears in the screen.

74