Roland RD-700 owner manual Effect/Parameter List, 105

04: PHASER

A phaser adds a phase-shifted sound to the direct sound, producing a twisting modulation that creates spaciousness and depth.

Manual #

Adjust the basic frequency from which the sound will be modulated.

Rate #

Adjust the frequency (period) of modulation.

Depth

Adjust the depth of modulation.

Resonance

Adjust the amount of feedback for the phaser.

The effect becomes more prominent as the value is increased.

Mix (Mix Level)

Adjust the ratio with which the phase-shifted sound is combined with the direct sound.

Pan (Output Pan)

Adjust the stereo location of the output sound. L64 is far left, 0 is center, and 63R is far right.

Level (Output Level)

Adjust the output level.

05: SPECTRUM

Spectrum is a type of filter which modifies the timbre by boosting or cutting the level at specific frequencies. It is similar to an equalizer, but has 8 frequency points fixed at locations most suitable for adding character to the sound.

Band 1 (Band 1 Gain)

Adjust the 250 Hz gain.

Band 2 (Band 2 Gain)

Adjust the 500 Hz gain.

Band 3 (Band 3 Gain)

Adjust the 1000 Hz gain.

Band 4 (Band 4 Gain)

Adjust the 1250 Hz gain.

Band 5 (Band 5 Gain)

Adjust the 2000 Hz gain.

Band 6 (Band 6 Gain)

Adjust the 3150 Hz gain.

Band 7 (Band 7 Gain)

Adjust the 4000 Hz gain.

Band 8 (Band 8 Gain)

Adjust the 8000 Hz gain.

Q

Simultaneously adjust the width of the adjusted areas for all the frequency bands.

Effect/Parameter List

Pan (Output Pan) #

Adjust the stereo location of the output sound. L64 is far left, 0 is center, and 63R is far right.

Level (Output Level) #

Adjust the output level.

06: ENHANCER

The Enhancer controls the overtone structure of the high frequencies, adding sparkle and tightness to the sound.

Sens (Sensitivity) #

Adjust the sensitivity of the enhancer.

Mix (Mix Level) #

Adjust the ratio with which the overtones generated by the enhancer are combined with the direct sound.

Low Gain

Adjust the gain of the low frequency range.

Positive (+) settings will emphasize (boost) the low frequency range.

High Gain

Adjust the gain of the high frequency range.

Positive (+) settings will emphasize (boost) the high frequency range.

Level (Output Level)

Adjust the output level.

07: AUTO WAH

The Auto Wah cyclically controls a filter to create cyclic change in timbre.

Filter (Filter Type)

Select the type of filter.

LPF: The wah effect will be applied over a wide frequency range.

BPF: The wah effect will be applied over a narrow frequency

range.

Sens (Sensitivity)

Adjust the sensitivity with which the filter is controlled.

Manual #

Adjust the frequency from which the effect is applied.

Peak

Adjust the amount of the wah effect that will occur in the area of the frequency. Lower settings will cause the effect to be applied in a broad area around the frequency. Higher settings will cause the effect to be applied in a more narrow range.

Rate #

Adjust the frequency of the modulation.

Depth

Adjust the depth of the modulation.

Level (Output Level)	Appendices
Adjust the output level.

105