Roland RD-700 owner manual Setting Parameters, Making System Settings System, Cursor

Setting Parameters

fig.Q5-01

Getting [EDIT] indicator light

Enter the Edit Mode

Edit Menu Screen

Select a menu

Edit Screen

Detailed Settings for Each Function ([EDIT])

Making System Settings (System)

Functions that affect the RD-700’s overall operating environment are called “System functions.”

How to Make Settings

1.Press [EDIT], getting the indicator to light.

The Edit Menu screen appears.

fig.Editmenu1.eps

2.Press CURSOR [ ] to select “0.System.”

3.Press CURSOR [ ] to display the Edit screen.

fig.Editmenu1.eps

:

(The number of Edit screen pages may vary according to the menu selected.)

Switch screens

Select an item

Change the value

You can input the value using the TONE SELECT buttons, and press [ENTER] to set the value.

Exit the Edit Mode

Extinguishing [EDIT] indicator

fig.system1.eps_150

fig.system2.eps_150

4.	Press CURSOR [ ] or [		] to switch screens, and press
	CURSOR [	] or [	] to move the cursor to the
	parameter to be set.
5.	Press [INC/YES] or [DEC/NO] to set the value.
6.	When you have finished making the settings, press
	[EDIT], extinguishing its indicator.			Edit
	When you exit Edit mode, the changed System settings
	are stored to the RD-700.			Mode
	You are returned to the Tone screen.

Settings for system functions are saved in the RD-700 whenever a change is made to their parameters. These settings are not deleted even when the power is turned off.

For more on the following system function parameters, refer to the corresponding pages.

Master Tune ➔p. 29 LCD Contrast ➔p. 28

69