Roland RD-700 Press SPLIT, getting the indicator to light, Selecting Both Layer and Split Mode

Performing with the Keyboard

Playing Different Tones in Two Different Sections of the Keyboard ([SPLIT])

Such a division of the keyboard into right- and left-hand sections is called a “Split,” and the key where the division takes place is called the “Split Point.”The split-point key is included in the UPPER section.

The Split Point has been set at the factory to “C4.”

You can change the split

point.

Please refer to “Changing

the Keyboard’s Split

Point” (p. 44).

fig.panel

CONTROL

1,2

1

Press [SPLIT], getting the indicator to light.

PART SWITCH [LOWER] lights.

Try fingering the keyboard.

fig.LCD

The UPPER tone plays in the right-hand section of the keyboard, and the LOWER tone plays in the left-hand section.

fig.LCD

Split Point (C4)

LOWER UPPER

2

To exit Split mode, press [SPLIT] once more, and the indicator

light goes out.

Selecting Both Layer and Split Mode

When both [LAYER] and [SPLIT] are on, the LOWER Tone is played at the left side of the Split Point, while the UPPER1 and UPPER2 Tones are layered to the right of the Split Point.

Performing

43