Roland RD-700 owner manual Setting Midi Receive Parts Internal Part Prm

Detailed Settings for Each Function ([EDIT])

Turning the Controllers in Each Part On and Off

These settings determine whether the pedals connected to each PEDAL jack (Damper, FC1, FC2), the Modulation lever, the Bender, and the [CONTROL] knob are used to control the Parts (ON), or not (OFF).

Parameter Value

Damper Pedal Sw

FC1 Pedal Sw

FC2 Pedal Sw

ON, OFF

Modulation Sw

Bender Sw

Control Sw

Assigning Internal Parts to Local Parts (Part Assign)

This determines which internal parts are assigned to the Local parts.

Parameter	Value
Part Assign	1–16

Setting MIDI Receive Parts (Internal Part Prm)

The sixteen Parts played by the RD-700’s internal sound generator are referred to as “Internal Parts.”

When connecting an external MIDI device to a sequencer or other device, by assigning the Receive channel to an Internal Part you can receive MIDI messages from the external MIDI device and control the Internal Parts.

These parameters determine how each Part will receive MIDI messages.

How to Make Settings

1.Press [EDIT], getting the indicator to light.

The Edit Menu screen appears.

fig.Editmenu2.eps_150

2.Press CURSOR [ ]/[ ] to select “8. Internal Part Prm.”

3.Press CURSOR [ ] to display the Edit screen.

fig.midipart1.eps_150

fig.midipart2.eps_150

fig.midipart3.eps_150

EditMode 4. Press CURSOR [ ] or [ ] to switch screens, and press

CURSOR [ ] or [ ] to move the cursor to the parameter to be set.

5.Press [INC/YES] or [DEC/NO] to set the value.

6.When you have finished making the settings, press [EDIT], extinguishing its indicator.

You are returned to the Tone screen.

89