LG Electronics HR939M Player scans all available access points or, To clear the highlighted part

				Connecting 21
4. The player scans all available access points or			,,Note
	wireless routers within range and displays them		If there is no DHCP server on the network and
	as a list. Use W/Sto select an access point or		you want to set the IP address manually, select
	wireless router on the list, and then press ENTER		[Static] then set [IP Address], [Subnet Mask],
	(b).		[Gateway] and [DNS Server] using W/S/
			A/Dand numerical buttons. If you make a
			mistake while entering a number, press CLEAR
			to clear the highlighted part.
			6. Select [OK] and press ENTER (b) to apply
			network settings.
			7. The player will ask you to test the network
			connection. Select [OK] and press ENTER
If you have security on your access point or			(b) to complete the network connection.
wireless router, verify that the WEP or WPA key			8. If you select [Test] and press ENTER (b)
that was entered into the player matches the			at step 7 above, the network connection status
router’s information exactly. You need to input the			is displayed on the screen.
security code as necessary.			You can also test it on the [Connection Status]
	,,Note		in the [Setup] menu.
		mode generally have 4 keys
yy WEP security
	available on an access point or wireless
	router’s setting. If your access point or
	wireless router uses WEP security, enter the
	security code of the key “No.1” to connect on
	your home network.
yy An Access Point is a device that allows you
	to connect to your home network wirelessly.
[Manual] – Your access point may not be
broadcasting its access point name (SSID). Check
your router settings through your computer
and either set your router to broadcast SSID, or
manually enter the access point name (SSID) in
[Manual].
[Push Button] – If your access point or wireless
router supports the Push Button Configuration
method, select this option and press the Push
Button on your access point or wireless router
within 120 counts. You do not need to know the
access point name (SSID) and security code of
your access point or wireless router.
5. Use W/S/A/Dto select the IP mode
	between [Dynamic] and [Static].
	Normally, select [Dynamic] to allocate an IP
	address automatically.

2

Connecting