Connecting 15
Connecting
2

HDMI Connection

If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.

TV

Rear of this unit
TV
HDMI Cable
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
yIf a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
yWhen you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 16.)
ySelect the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 31).
yChanging the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.
yWhen the HDMI connection with HDCP is
not veried, TV screen is changed to black
screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
yIf there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
, Note

Additional Information for HDMI

yWhen you connect a HDMI or DVI compatible
device make sure of the following:
yTry switching o the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
yThe connected device’s video input is set
correctly for this unit.
yThe connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yNot all HDCP-compatible HDMI or DVI devices
will work with this player.
yThe picture will not be displayed properly
with non-HDCP device.
yThis player does not playback and TV screen
is changed to black screen.