Motorola MTH800 manual Setting Group Audio, Setup

From the main menu, select Setup > Data

Setup.

The display shows the current setting:

1.Voice Only—The MTH800 will receive and transmit voice calls only.

Data Setup
Voice Only
Data Only
Voice & Data
Select	Back

2.Data Only—The MTH800 acts as a modem. The MTH800 will reject incoming and outgoing voice calls (ex- cept for Emergency Calls), status and text messages.

3.Voice & Data—The MTH800 acts as a modem but voice calls will have priority over data calls and will interrupt them.

Scroll to the desired setting and press Select.

In Data Only and in Voice & Data, the Data Connected icon is displayed after you have connected the MTH800 to the external device and the MTH800 is ready for data transfer. The Data Transmit/Receive icon is displayed to indicate data is being transferred to/received from the external device.

The MTH800 ends the AL call and the microphone is closed when the MTH800 is in one of the following states:

•Entering the out-of-service area

•Outgoing packet data call setup

To exit data, return to Data Setup and select Voice Only. The MTH800 returns automatically to Voice communication.

Data services are available only in TMO. Data Services are blocked in TXI Mode.

When set to Voice Only, the built in data modem is disabled to conserve battery power.

Setting Group Audio

You can control audio routing (speaker/earpiece) for any Private or Group Call via the dedicated Speaker Control key (see page 21.)

You can also define via the menu to have all Group calls in high audio or controlled by the Speaker Control key.

84