Motorola MTH800 manual Receiving a Group Call in Idle Screen with Scan Off

When receiving a Group call, you will hear a “New Group Call” tone (if configured by your Service Provider).

Receiving a Group Call in Idle Screen with Scan Off

You can receive a group call from the selected talkgroup or from the associated ATG only.

Your MTH800 will receive the Group Call.

Receiving a Group Call in Idle Screen with Scan On

With Scan On, you can receive a group call from the scan list you set up, in addition to receiving a group call from the selected talkgroup or from the associated ATG.

Receiving the scan call functions as receiving an associated ATG or selected call in scan off (see previous page), except for the following:

Group In Use
TG4
ID: David
Optns	Folder

Group In Use
TG4
ID: David
Optns	End

•The display is different when receiving the call in idle screen, as shown here.

•The terminal sounds a tone as explained in the note below.

•When receiving a High Priority Group Call, you will hear a “High Priority Group Call” tone (if configured by your Service Provider).

•When receiving a Group Call from your scan list, which is not from a high priority group, you will hear a “New Group Call” tone (if configured by your Service Provider).

•To block reception of a Group Call, select Optns then Block. Powering off/on the terminal unblocks the recep- tion of this Group Call.

38