Motorola MTH800 manual Setting Group Scanning, Set Scanning to On, Set Scanning to Off

Setting Group Scanning

This sub-menu allows you to activate/deactivate the scanning of a list of pre-defined groups programmed in the MTH800. The MTH800 will join any group call as long as this group is defined in the scan list and scan is turned on.

From the main menu, select More > Group Setup > Scan >

Scanning.

After completing the settings, the display returns to the Scan sub-menu.

Set Scanning to On
Scanning is Off. Select On. A message may		Scanning
indicate that all scan lists are empty. Select		On
		SelectList
Scan Lists to fill the scan list(s).
The display shows the following state:	Select Back

Then, the display shows (for example) the

Scanning Scan List 1 message. The terminal will then try to attach to this list.

The Menu

Set Scanning to Off

Scanning is on. Select Off. The display shows the following state:

Then, the display shows the Scanning is Off message.

Selecting a List with Scanning On

1.Select SelectList.

2.To select a list other than the highlighted one, scroll and press Select. The display shows (for example) the Scanning Scan List 1 message. The terminal will then try to attach to this list.

Scanning
Off
SelectList
Select	Back

Scan Lists
Network List
Scan List 1
Scan List 2
Scan List 3
Select	Back

91