Motorola MTH800 manual Replacing the Battery, Charging the Battery

Replacing the Battery

1.To remove the battery cover, push down the cover button. Slide the cover away.

2.Push retaining clip up and then lift the top of the battery out.

3.Replace the battery.

RETAINING CLIP

Charging the Battery

Motorola approved chargers provide optimum performance. Other chargers may not fully charge your Motorola Lithium- Ion battery or may reduce the life of the battery.

The MTH800 can be either On or Off during charging.

1.Insert the connector on the charger into the socket at the base of the MTH800. Select the required plug adapter (UK or Euro- pean type) and connect to the charger. Then plug the charger into a suitable mains socket.

2.The MTH800 displays the Charger Connected message only if the MTH800 is On when connecting the charger. If the MTH800 is Off, the display shows an icon of the battery in charging.

The Battery icon shows the charging status (see below).

Empty	Full	Empty	Full
Battery Capacity			Battery Charge Progress

Getting Started

5