Motorola MTH800 manual Powering On Emergency Button, Powering On with Transmit Inhibit TXI Active

Powering On (Emergency Button)

Press and hold the Emergency button to power On.

The MTH800 will power On in Emergency Operation or in standard mode (as programmed).

Powering On with Transmit Inhibit (TXI) Active

Transmit Inhibit is a feature allowing you to switch off transmission before entering a Radio-Frequency (RF) sensitive area. To activate

this feature, press	E	and select More...> Networks > TXI Mode
	M NU
> Activate.

Pressing the Emergency button, even if Transmit Inhibit is activated, causes

!the MTH800 to transmit immediately. The MTH800 must NOT be within the W A R N I N G RF sensitive area when entering Emergency Operation.

The TXI Mode remains active at power On. You will be asked whether to leave the TXI Mode On or not.

Ensure you have left the RF sensitive area before deactivating Transmit

!Inhibit.

W A R N I N G

Press the Yes key to deactivate the TXI Mode. If the MTH800 was previously used in Trunked Mode, it will register to the network. If the MTH800 was previously used in Direct Mode, it will remain in Direct Mode.

Press No in Trunked Mode and the MTH800 powers down; press No in DMO and you remain in DMO with TXI selected.

Unlocking the MTH800

Your MTH800 may be locked at power up.

To unlock the MTH800 after powering on, enter the code at the prompt. The MTH800 enters the default Home display.

The unlock code is originally set to 0000. Your Service Provider may change this number before you receive your terminal.

12