Motorola MTH800 manual Setting the Volume, Setting the Display’s Working Language

Setting the Volume

Once in the menu, select 3 Set Volume.

This sub-menu allows you to adjust the ringer, earpiece, speaker, and keypad tone volume.

To set the volume:

1.From the main menu, select Setup >

Volume.

Volume
Ringer Vol: 0_
Earpiece Vol: 1_
Speaker Vol: 1_
Keypad Vol: 0_
Change	Done

The Menu

2.Scroll through the list.

3.Choose the required item, and press Change.

4.Adjust the volume level. A feedback tone is heard, and a volume level bar is displayed.

5.Press Back to exit.

Setting the Display’s Working Language

From the main menu, select Setup >

Language.

The display shows the current language used. You can customize your MTH800 to operate in English, German, French, Spanish, Dutch, or in a language defined by your Service Provider. The default setting from factory is English.

Language
English
Deutsch
Français
Español
Nederlands
Select	Back

Scroll to the desired language and press Select. The display shows the selected language for a few seconds.

Setting Up the Data Function

You can connect the MTH800 to an external device (such as a laptop or desktop PC). The MTH800 will then be capable of transmitting and receiving data from the external device.

To connect the MTH800 accessory connector to the external device, use cable FKN4897. The external device must run an application complying with the TETRA standards.

83