Motorola MTH800 Viewing the Active Scan List, Selecting a List with Scanning Off, Network List

Selecting a List with Scanning Off

1.Select SelectList.

2.To select a list other than the highlighted one, scroll and press Select. The display shows (for example) the Scan List 1 Selected message.

The Network List

Your terminal can scan (and attach) to a list belonging to another infrastructure than the Dimetra infrastructure:

•Upon pressing Select, if the Network List is selected, only this list will attach. If a user list is selected, then both the Network List and the user list will be attached.

•In some cases part of the groups in the scan list could be invalid for specific sites. In this case, when the terminal tries attachment to the list, the infrastructure might partially reject attachments. The terminal’s display shows: “List par- tially attached”.

•When the Network List is empty, it will be displayed as No List. Selecting No List will display the message No Selected Scan List.

Viewing the Active Scan List

This sub-menu allows you to view the active scan list (Scan List 1 in this example).

1.From the main menu, select More > Group Setup > Scan > Active List. Press View.

The display will show one of the following states:

•There is a selected, inactive scan list (Scan List 1 is Not Active). Scanning is off.

•Scanning is off and the Network List is selected (Network List Not Active).

•There is a selected, active scan list. Scanning is on.

92