Motorola MTH800 manual Activating/deactivating Scanning, Making a Group Call

•Stay in folder—when the folder end is reached during group scrolling, further scrolling restarts the folder group list. To move to the next Folder, you should select it.

For example: Folder 1 has Group11 and Group12. Folder

2 has Group21 and Group22. Select Folder 1: Group11, Group12, Group11,Group12 will appear during scrolling. Change to Folder 2: Group 21, Group 22, Group 21, and Group 22 will appear during scrolling.

In addition, your Service Provider might configure the rotary knob as follows:

•End-Stop Rotary Knob Scrolling—the rotary knob will stop when it reaches the last group in the folder, and a tone will alert you that you have reached the last group in the folder. Use the navigation key to continue scrolling through the list.

Activating/deactivating Scanning

See “Setting Group Scanning” on page 91.

Making a Group Call

1.From the Home display and if this is the required group, press and hold the PTT.

2.Wait for the talk permit tone (if configured) and then speak into the microphone. Re- lease the PTT button to listen.

When you start a call, all members of the selected group who have their units turned on, will receive the Group Call.

If you are in an on-going Group Call and wish to make a

new call, press to ignore the current call. Start the new call.

Network 1

Folder 1

Police

Hello

Optns Contcs

Group In Use
Folder 1
TG4
Optns	Folder

36