Motorola MTH800 manual Editing Scan Lists, Group Setup Scan Scan Lists

Then, the display will show the Scan Lists
sub-menu.			Scan Lists
2.	Scroll to the required list and press View		Scan List 1
			Network List
	to see the groups that belong to the list.
3.	Scroll to the required group and press	View		Back
	View to view the group status (attached

or not attached) and priority (if pre-programmed).

4.Press Back to return to the previous display. Then, if re- quired, press MENU . You can select to delete the group from the scan list or change its priority.

If the Network List is empty, it will not be displayed.

The Menu

Editing Scan Lists

1.From the main menu, select More >

Group Setup > Scan > Scan Lists.

Scan Lists
Scan List 1
Scan List 2
Network List
View	Back

List Optns
Rename
Capacity
Clear List
Add Group
Edit
Select	Back

2.	Scroll to the required
	scan list. Press View to see the groups used in the scan
	list. Press Back to return to the previous display.
3.	To edit/view the contents of a scan list, press	E		.
		M	NU

4. In the List Optns sub-menu, scroll to the required option and press Select.

• The options below cannot be used for the Network List.

• If the Network List is empty, it will not be displayed.

•Rename the active scan list. (For details on text editor use, see “Writing Text” on page 114). Enter a new name (alias) and press Ok. The display shows the new setting.

•Check the capacity of the active scan list (number of groups stored in the list).

93